Anyone into nitro R/C?

That Guy · 06-01-2015, 08:27 AM

Hey everyone. New to the forum, but not to the area.

Been poking around with the idea of getting back into radio controlled cars and trucks. I was deep into electric r/c 15+ years ago. I'd probably get into nitro powered this time. Was curious if anyone in the area did any racing or anything. I checked out the RT 106, but its a bit of a drive and it doesn't look like they do nitro. I'm not 100% focused on getting back into the hobby, but if there were a group of folks in the area that were, then I could see myself actively looking for a new truck or car.

thinkxingu · 06-01-2015, 08:38 AM

Hi, and welcome! I was into nitro buggies up until last year, but I sold everything when my chillens started taking all my time.

Have been thinking about getting another one, but would get electric this time as battery technology, and location, preclude the....idiosyncrasies...of nitro.

Don't know of any racing areas closer than 106.

patman · 06-01-2015, 08:48 AM

Mildly related...Marden's in Portland just got in a huge lot of hobby shop stuff. There were plastic car and copter bodies, tires of all description, cans of fuel, suspension parts, chargers, kits, servos, receivers...you name it. All at 70% off sticker. Just past the customer service area as you come in the front doors.

That Guy · 06-01-2015, 08:50 AM

Good to know. Thanks man.

There any indication of brands? Are they hobby-grade or "Radio Shack" stuff?

Rich · 06-01-2015, 09:58 AM

I'm more interested in RC things that fly than those that are on the land/water (I find the land/water based items too limiting).

I did have a thread I started to see if anyone else was interested in getting together around the lake, but there didn't seem to be much interest other than from spectators:
http://www.winnipesaukee.com/forums/...ad.php?t=17158

patman · 06-01-2015, 10:23 AM

Quote:

Originally Posted by That Guy

Good to know. Thanks man.

There any indication of brands? Are they hobby-grade or "Radio Shack" stuff?

It's all name brand hobby items, definitely NOT box store stuff. It looked like it was the complete contents from a small R/C-specific hobby shop store. Tons of 'part in a plastic bag hanging on pegboard hook' sort of things.

patman · 06-07-2015, 12:23 PM

Snapped a picture yesterday...

glennsteely · 06-07-2015, 06:18 PM

Very curious to see what position you were in when you snapped that picture.....must have been a tough one!!

Lol!!!

Just joshing you buddy!!

I, personally love the boats, there is a guy at a local park down here where i live who has a offshore racing type boat that is probably about 4-5 feet long that goes real fast, i'd bet that thing is going like 70-80 mph!! It is awesome, i would love to get one of those!!

patman · 06-07-2015, 07:32 PM

Quote:

Originally Posted by glennsteely

Very curious to see what position you were in when you snapped that picture.....must have been a tough one!!

Lol!!!

Yeah...I was standing on my head. It was quite a sight!

(Actually, the vBulletin software isn't smart enough to do anything useful with the orientation info in the .jpg headers for some reason, so when you upload from a mobile device, it's kind of a crapshoot which side it'll decide is the top. I edited the picture and re-uploaded it, so it displays correctly now.)

glennsteely · 06-07-2015, 08:11 PM

Quote:

Originally Posted by patman

yeah...i was standing on my head. It was quite a sight!

(actually, the vbulletin software isn't smart enough to do anything useful with the orientation info in the .jpg headers for some reason, so when you upload from a mobile device, it's kind of a crapshoot which side it'll decide is the top. I edited the picture and re-uploaded it, so it displays correctly now.)

too cool and too funny!!! Hey buddy, is that your car in the avatar? Very nice!!

I'm still trying to process you on your head taking that flick.....lol.

HomeWood · 06-08-2015, 08:34 AM

I really like r/c boats but so much of what is out there looks unrealistic. That's fine if you want just a go fast boat. I want to get into large, realistic, gas powered r/c boats. The hobby stores around me only sell the stuff I am not all that interested in and they are expensive, too. I cannot believe how much a molded plastic hull with some hardware costs.

I think the only way I will get what I want is to build it but I have pretty much no fine wood working experience. I would love to put a small 4 stroke Honda engine (weed trimmer size) in a run-about style boat with a water cooled exhaust to mimic a class Christ Craft and the like.

I have a couple electric trucks. One is a vintage Team Associated but I don't have the same interest in them as I used to.

laketrout · 06-19-2015, 08:58 AM

Quote:

Originally Posted by That Guy

Hey everyone. New to the forum, but not to the area.

Been poking around with the idea of getting back into radio controlled cars and trucks. I was deep into electric r/c 15+ years ago. I'd probably get into nitro powered this time. Was curious if anyone in the area did any racing or anything. I checked out the RT 106, but its a bit of a drive and it doesn't look like they do nitro. I'm not 100% focused on getting back into the hobby, but if there were a group of folks in the area that were, then I could see myself actively looking for a new truck or car.

This link is not cars but flying,. I have been a few times, its pretty cool to see the big scale rc gas and electrics fly.

http://www.wrcnh.org/about/

That Guy · 06-19-2015, 09:35 AM

Whoops, forgot I made this thread.

I actually passed on nitro and picked up an electric Traxxas Rustler a couple days ago for short money. I'll be headed to RT 106 Hobby in a few weeks to get myself racing it looks like. Fun little truck. As it sits, I have it going I'd say 35mph. Ordeing two LiPos and a charger this weekend. I figure with a 2S 5000MAH Lipo, some different tires, and play with the gearing I'll be hitting 70mph.

06-01-2015, 08:27 AM	#1
That Guy Senior Member Join Date: May 2015 Posts: 182 Thanks: 37 Thanked 74 Times in 43 Posts	Anyone into nitro R/C? Hey everyone. New to the forum, but not to the area. Been poking around with the idea of getting back into radio controlled cars and trucks. I was deep into electric r/c 15+ years ago. I'd probably get into nitro powered this time. Was curious if anyone in the area did any racing or anything. I checked out the RT 106, but its a bit of a drive and it doesn't look like they do nitro. I'm not 100% focused on getting back into the hobby, but if there were a group of folks in the area that were, then I could see myself actively looking for a new truck or car.

06-01-2015, 09:58 AM	#5
Rich Senior Member Join Date: Jun 2012 Location: Derry / Gilford Posts: 1,244 Thanks: 72 Thanked 344 Times in 234 Posts	I'm more interested in RC things that fly than those that are on the land/water (I find the land/water based items too limiting). I did have a thread I started to see if anyone else was interested in getting together around the lake, but there didn't seem to be much interest other than from spectators: http://www.winnipesaukee.com/forums/...ad.php?t=17158 __________________ Don't listen to me, obviously I don't understand what I'm talking about! Let's help each other save time and money: WinniGas.com

06-07-2015, 12:23 PM	#7
patman Senior Member Join Date: Jun 2008 Location: NH Posts: 379 Thanks: 56 Thanked 156 Times in 78 Posts	Snapped a picture yesterday... Attached Images Last edited by patman; 06-07-2015 at 07:28 PM.

06-07-2015, 06:18 PM	#8
glennsteely Senior Member Join Date: Jun 2004 Location: Mantua, N.J. Posts: 472 Thanks: 90 Thanked 111 Times in 38 Posts	Wow!!! Very curious to see what position you were in when you snapped that picture.....must have been a tough one!! Lol!!! Just joshing you buddy!! I, personally love the boats, there is a guy at a local park down here where i live who has a offshore racing type boat that is probably about 4-5 feet long that goes real fast, i'd bet that thing is going like 70-80 mph!! It is awesome, i would love to get one of those!! __________________ You have to go out on a limb sometimes, cause that is where the fruit is. You can't get to the fruit from that nice safe spot, clinging to the trunk of the tree......

06-01-2015, 08:38 AM	#2
thinkxingu Senior Member Join Date: Jul 2014 Posts: 6,211 Thanks: 1,167 Thanked 2,048 Times in 1,271 Posts	Hi, and welcome! I was into nitro buggies up until last year, but I sold everything when my chillens started taking all my time. Have been thinking about getting another one, but would get electric this time as battery technology, and location, preclude the....idiosyncrasies...of nitro. Don't know of any racing areas closer than 106.

06-01-2015, 08:48 AM	#3
patman Senior Member Join Date: Jun 2008 Location: NH Posts: 379 Thanks: 56 Thanked 156 Times in 78 Posts	Mildly related...Marden's in Portland just got in a huge lot of hobby shop stuff. There were plastic car and copter bodies, tires of all description, cans of fuel, suspension parts, chargers, kits, servos, receivers...you name it. All at 70% off sticker. Just past the customer service area as you come in the front doors.

The Following User Says Thank You to patman For This Useful Post:
That Guy (06-01-2015)

06-01-2015, 08:50 AM	#4
That Guy Senior Member Join Date: May 2015 Posts: 182 Thanks: 37 Thanked 74 Times in 43 Posts	Good to know. Thanks man. There any indication of brands? Are they hobby-grade or "Radio Shack" stuff?

The Following User Says Thank You to patman For This Useful Post:
kauriel (06-07-2015)

The Following User Says Thank You to patman For This Useful Post:
glennsteely (06-07-2015)

06-08-2015, 08:34 AM	#11
HomeWood Senior Member Join Date: May 2006 Location: Clayton,NC / Sanbornton,NH Posts: 611 Thanks: 126 Thanked 137 Times in 75 Posts	I really like r/c boats but so much of what is out there looks unrealistic. That's fine if you want just a go fast boat. I want to get into large, realistic, gas powered r/c boats. The hobby stores around me only sell the stuff I am not all that interested in and they are expensive, too. I cannot believe how much a molded plastic hull with some hardware costs. I think the only way I will get what I want is to build it but I have pretty much no fine wood working experience. I would love to put a small 4 stroke Honda engine (weed trimmer size) in a run-about style boat with a water cooled exhaust to mimic a class Christ Craft and the like. I have a couple electric trucks. One is a vintage Team Associated but I don't have the same interest in them as I used to.

06-19-2015, 09:35 AM	#13
That Guy Senior Member Join Date: May 2015 Posts: 182 Thanks: 37 Thanked 74 Times in 43 Posts	Whoops, forgot I made this thread. I actually passed on nitro and picked up an electric Traxxas Rustler a couple days ago for short money. I'll be headed to RT 106 Hobby in a few weeks to get myself racing it looks like. Fun little truck. As it sits, I have it going I'd say 35mph. Ordeing two LiPos and a charger this weekend. I figure with a 2S 5000MAH Lipo, some different tires, and play with the gearing I'll be hitting 70mph.