Identify This Boat - Dinghy ??

wanderer1953 · Yesterday, 02:37 PM

Is anyone able to identify the Make and Year of this Dinghy ??
---
Would greatly appreciate, and / or to provide me with how I might determine the Make and Year, or approximate year.

Thanks Much,
-- Ron
Wanderer0119@aol.com

https://www.winnipesaukee.com/forums...1&d=1750620815

fatlazyless · Yesterday, 02:53 PM

Look for the hull identification number or HIN#, a twelve digit alpha-numeric with both letters and numbers that is usually stamped into the upper right hand corner of the transom. With the HIN# you should be able to determine the manufacturer and boat model via a Google search.

Looking at the photo it could be underneath the rub rail in the back, upper right transom. Sometimes it is difficult to read and a #2 lead pencil rubbing on a small piece of thin white paper taped over the unreadable HIN# will help to identify it.

Descant · Today, 09:06 AM

Universal Hull Identification Numbers (HINs) were first required in the United States starting in November 1972.
Prior to this date, boat builders used serial numbers, but they lacked a standardized format and did not consistently indicate the boat's manufacturing date. (Google)
So, a serial number could be anyplace, but would at least indicate prior to 1972.

The Real BigGuy · Today, 10:41 AM

I second Descant. I had a 13 ft Whaler that had a 4 digit number inked on the inside of the transom. First time I went to register it in NH the marina wouldn't believe me and wouldn't do the registration. I had to bring them a picture of the boat showing the number to get it registerd.

Descant · Today, 11:07 AM

Quote:

Originally Posted by The Real BigGuy

I second Descant. I had a 13 ft Whaler that had a 4 digit number inked on the inside of the transom. First time I went to register it in NH the marina wouldn't believe me and wouldn't do the registration. I had to bring them a picture of the boat showing the number to get it registered.

Ah yes! And before that, when we had plates instead of bow numbers, outboard motors were registered, NOT the boat. Often the plate was attached to the motor as motors could easily be moved from boat to boat. I have no knowledge of a serial number on my first power boat which was a Chris Craft Kit, built at home, with a 7.5 hp Scott-Atwater motor, c.1957.

Yesterday, 02:37 PM	#1
wanderer1953 Junior Member Join Date: Mar 2018 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	Identify This Boat - Dinghy ?? Is anyone able to identify the Make and Year of this Dinghy ?? --- Would greatly appreciate, and / or to provide me with how I might determine the Make and Year, or approximate year. Thanks Much, -- Ron Wanderer0119@aol.com https://www.winnipesaukee.com/forums...1&d=1750620815 Attached Images

Today, 09:06 AM	#3
Descant Senior Member Join Date: Mar 2006 Location: Merrimack and Welch Island Posts: 4,382 Thanks: 1,353 Thanked 1,628 Times in 1,060 Posts	Hin ? Universal Hull Identification Numbers (HINs) were first required in the United States starting in November 1972. Prior to this date, boat builders used serial numbers, but they lacked a standardized format and did not consistently indicate the boat's manufacturing date. (Google) So, a serial number could be anyplace, but would at least indicate prior to 1972.

Yesterday, 02:53 PM	#2
fatlazyless Senior Member Join Date: Apr 2004 Posts: 8,764 Blog Entries: 1 Thanks: 300 Thanked 1,016 Times in 740 Posts	Look for the hull identification number or HIN#, a twelve digit alpha-numeric with both letters and numbers that is usually stamped into the upper right hand corner of the transom. With the HIN# you should be able to determine the manufacturer and boat model via a Google search. Looking at the photo it could be underneath the rub rail in the back, upper right transom. Sometimes it is difficult to read and a #2 lead pencil rubbing on a small piece of thin white paper taped over the unreadable HIN# will help to identify it. __________________ ... down and out, liv'n that Walmart side of the lake!

Today, 10:41 AM	#4
The Real BigGuy Senior Member Join Date: Apr 2004 Posts: 1,310 Thanks: 125 Thanked 472 Times in 287 Posts	I second Descant. I had a 13 ft Whaler that had a 4 digit number inked on the inside of the transom. First time I went to register it in NH the marina wouldn't believe me and wouldn't do the registration. I had to bring them a picture of the boat showing the number to get it registerd.