Go Back   Winnipesaukee Forum > Winnipesaukee Forums > Boating > Boat Repairs & Maintenance
Home Forums Gallery Webcams Blogs YouTube Channel Classifieds Register FAQ Members List Donate Today's Posts

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-22-2022, 04:14 PM   #4
8gv
Senior Member
 
8gv's Avatar
 
Join Date: Jan 2012
Posts: 2,230
Thanks: 63
Thanked 773 Times in 504 Posts
Default

Your trailer connection carries 12V positive to each light as needed AND a negative via a white wire to a screw which grounds (bonds?) the trailer frame.

The trailer frame becomes the carrier for 12V negative and is tapped in several places to accommodate each light.

Side lights typically have a 12V positive wire and another, negative wire that is grounded to the trailer frame.

If the lights don't shine then find the ground wire and ground it to some bare metal.

It that makes them light then sand or file the place where the ground wire goes and reattach with a new screw.

You can also test for 12V at the side light by probing the 12V wire and a bare metal part of the trailer.

To do this you will penetrate the wire and make it more likely to fail in the furure.

Good luck!
8gv is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 10:35 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.

This page was generated in 0.12956 seconds