|
Home | Forums | Gallery | Webcams | Blogs | YouTube Channel | Classifieds | Calendar | Register | FAQ | Donate | Members List | Today's Posts | Search |
|
Thread Tools | Display Modes |
09-20-2021, 05:11 PM | #1 |
Member
Join Date: Dec 2011
Posts: 34
Thanks: 10
Thanked 2 Times in 2 Posts
|
Non lake commercial boating question
I was hoping someone can explain this maneuver to me. The picture is a bit far away. The tug in front of the barge has a rope at 45 degrees to the bow of the barge. The tug is going backward. The rope is taut.
The tug in back of the barge has the same set up and is going forward. Neither tug is in contact with the barge. They are traveling extremely slowly towards the mouth of the mystic River. Sent from my SM-N976V using Tapatalk |
09-20-2021, 06:32 PM | #2 |
Senior Member
Join Date: Jul 2009
Location: San Francisco/Meredith
Posts: 1,496
Thanks: 607
Thanked 634 Times in 324 Posts
|
How do you know that tug in back is going forward?
If it were, the rope would not be taut. The tug would be pushing the rope. No?
__________________
Gary ~~~~_/) ~~~ ~~~~~~~~ |
09-20-2021, 06:42 PM | #3 |
Senior Member
Join Date: Jul 2009
Location: San Francisco/Meredith
Posts: 1,496
Thanks: 607
Thanked 634 Times in 324 Posts
|
If the tug in back is indeed moving forward, it is probably being pulled by the tug in front going backward...The purpose of the rear tug would be to maintain a taut rope in order to control the angle, not assist with forward progress.
__________________
Gary ~~~~_/) ~~~ ~~~~~~~~ |
09-20-2021, 08:43 PM | #4 |
Senior Member
Join Date: Jan 2012
Posts: 2,017
Thanks: 61
Thanked 704 Times in 458 Posts
|
If that is the Mystic River in CT it sure has changed a lot!
Mystic... where? |
09-20-2021, 08:55 PM | #5 |
Senior Member
Join Date: Apr 2011
Location: Under the former KNHZ bounce pattern
Posts: 477
Thanks: 3
Thanked 207 Times in 110 Posts
|
Uhh… that's not a barge.
|
Sponsored Links |
|
09-20-2021, 09:59 PM | #6 |
Senior Member
Join Date: Jan 2013
Posts: 743
Thanks: 750
Thanked 301 Times in 200 Posts
|
And how is this related to the Lakes Region? Seriously, the posts that are not related to the lake are getting old.
Sent from my iPad using Winnipesaukee Forum mobile app
__________________
GG |
The Following User Says Thank You to gillygirl For This Useful Post: | ||
AltonCAM (09-24-2021) |
09-21-2021, 07:25 AM | #7 |
Senior Member
Join Date: Jul 2004
Posts: 2,974
Thanks: 246
Thanked 736 Times in 438 Posts
|
The tug on the bow is moving the ship forward. The tug on the stern is helping to maintain control of the ship. Both need to be ready to pull or push the ship in any direction as the ship is affected by wind, current or unexpected hazards.
These tugs almost certainly have pod drives (azimuth thrusters) that can swivel 360 degrees, thus it does not really matter which end of the tug is tied to the ship while pulling, but from a control perspective, it makes sense for both tugs to face the ship so that if they need push, they have maximum control. |
09-21-2021, 07:44 AM | #8 |
Senior Member
Join Date: Apr 2007
Location: Maynard, MA & Paugus Bay
Posts: 2,523
Thanks: 747
Thanked 344 Times in 257 Posts
|
DaveR is correct, former Tug guy here
__________________
Capt. of the "No Worries" |
09-21-2021, 07:53 AM | #9 | |
Member
Join Date: Dec 2011
Posts: 34
Thanks: 10
Thanked 2 Times in 2 Posts
|
Quote:
Sent from my SM-N976V using Tapatalk |
|
09-21-2021, 07:55 AM | #10 |
Member
Join Date: Dec 2011
Posts: 34
Thanks: 10
Thanked 2 Times in 2 Posts
|
|
09-27-2021, 06:29 AM | #11 |
Senior Member
Join Date: Jul 2004
Posts: 2,974
Thanks: 246
Thanked 736 Times in 438 Posts
|
I was hanging out with friends in our marina on Saturday afternoon when a marina neighbor/friend called me. He was bringing his 46 foot twin diesel boat into Hampton Harbor to return to the marina from Gloucester and lost forward gear on the starboard engine, and reverse gear on the port engine (Volvo Penta electronic shifters).
I hung up the phone, informed the group of the problem and we sprang into action. Some folks grabbed fenders (we have a giant "docking did not go as planned" ball fender that we leave in our cockpit all the time for these kinds of emergencies, so that was the first one grabbed) and climbed aboard the boat he shares a slip with, some folks grabbed boat hooks and prepared to catch lines, and two of us jumped in our RIB tenders and headed out to escort him in. Unfortunately, he needed to spin the boat counter-clockwise to back into his slip, and that's exactly what he could not do with the transmissions as they were. We used the two RIBs like tug boats and got him perfectly aligned by pushing on the two ends of his boat, while others got control of the lines from the docks and hauled him backwards into his slip. Everything went perfectly and we took it slowly so there was no damage or danger. Was actually really fun. FWIW, the port transmission had a clogged screen on reverse shift valve, the other transmission seems to have an electrical fault in the shift solenoids or controls. |
09-27-2021, 08:11 AM | #12 |
Senior Member
Join Date: Jan 2012
Posts: 2,017
Thanks: 61
Thanked 704 Times in 458 Posts
|
I am a fan of cables.
|
09-27-2021, 10:39 AM | #13 |
Senior Member
Join Date: Feb 2005
Location: Gilford, NH and Florida
Posts: 2,914
Thanks: 650
Thanked 2,164 Times in 906 Posts
|
About 6 weeks ago I had a problem with Volvo Penta drives in a boat. The position sensor on the left drive failed and that drive couldn't be controlled and the engine went into limp home mode. With the joystick and electronic shifters and steering it really disables the boat.
Power Products from Portland Maine (and Wakefield MA) sent someone over and he diagnosed the problem, ordered the part, and came back 5 days later to install it. I was very impressed with the service and the gentleman who came out. Very professional. |
Bookmarks |
|
|