Go Back   Winnipesaukee Forum > Winnipesaukee Forums > Boating > Boat Repairs & Maintenance
Home Forums Gallery Webcams Blogs YouTube Channel Classifieds Calendar Register FAQDonate Members List Today's Posts

Reply
 
Thread Tools Display Modes
Old 02-12-2020, 07:55 PM   #1
Sam603
Member
 
Join Date: Mar 2018
Posts: 24
Thanks: 10
Thanked 2 Times in 2 Posts
Default Stern drive maintenance

After 3 seasons and roughly 160 hours +\- is it necessary to have the $460 service done that the dealer recommends for the outdrive? I’m comfortable changing fluids and doing basic maintenance but not sure I’m ready to remove the outdrive which they claim they will do.


Sent from my iPhone using Winnipesaukee Forum mobile app
Sam603 is offline   Reply With Quote
Old 02-12-2020, 08:16 PM   #2
Dave R
Senior Member
 
Dave R's Avatar
 
Join Date: Jul 2004
Posts: 2,980
Thanks: 246
Thanked 739 Times in 440 Posts
Default

You should be pulling the drive every year to check the alignment, u-joints, gimbal bearing and bellows. If you are not comfortable with that, it would be worth paying to have it done, especially after 3 seasons.
Dave R is offline   Reply With Quote
The Following User Says Thank You to Dave R For This Useful Post:
BroadHopper (02-15-2020)
Old 02-12-2020, 08:23 PM   #3
8gv
Senior Member
 
8gv's Avatar
 
Join Date: Jan 2012
Posts: 2,059
Thanks: 63
Thanked 719 Times in 468 Posts
Default

Quote:
Originally Posted by Dave R View Post
You should be pulling the drive every year to check the alignment, u-joints, gimbal bearing and bellows. If you are not comfortable with that, it would be worth paying to have it done, especially after 3 seasons.
I concur and will add that the calamity that this maintenance prevents is VERY expensive!
8gv is online now   Reply With Quote
Old 02-12-2020, 08:49 PM   #4
Hillcountry
Senior Member
 
Hillcountry's Avatar
 
Join Date: Apr 2016
Location: In the hills
Posts: 2,405
Thanks: 1,658
Thanked 776 Times in 465 Posts
Default

B-O-A-T = Break Out Another Hundred $$$$$$$$$$$
Hillcountry is offline   Reply With Quote
Old 02-12-2020, 09:29 PM   #5
Formula260SS
Senior Member
 
Formula260SS's Avatar
 
Join Date: Oct 2006
Location: NH
Posts: 384
Thanks: 11
Thanked 76 Times in 51 Posts
Default

Quote:
Originally Posted by Dave R View Post
You should be pulling the drive every year to check the alignment, u-joints, gimbal bearing and bellows. If you are not comfortable with that, it would be worth paying to have it done, especially after 3 seasons.
I have them pull mine every other year. its a must do in my opinion. keeps the coupling from grenading. I may shop the price seems a little high.
Formula260SS is offline   Reply With Quote
Sponsored Links
Old 02-13-2020, 08:19 AM   #6
TiltonBB
Senior Member
 
Join Date: Feb 2005
Location: Gilford, NH and Florida
Posts: 2,955
Thanks: 673
Thanked 2,179 Times in 916 Posts
Default

Quote:
Originally Posted by Hillcountry View Post
B-O-A-T = Break Out Another Hundred $$$$$$$$$$$
The T stands for THOUSAND!
TiltonBB is offline   Reply With Quote
The Following User Says Thank You to TiltonBB For This Useful Post:
Hillcountry (02-13-2020)
Old 02-13-2020, 08:57 AM   #7
SAB1
Senior Member
 
Join Date: Feb 2012
Location: Tuftonboro
Posts: 1,209
Thanks: 186
Thanked 310 Times in 227 Posts
Default

Kinda depends on usage. I pull mine every other but my Volvo Penta also has a grease fitting on the outside that puts grease right to the bearing so I grease that periodically. Your averaging just over 50 hrs a season. IMO you would be fine pulling it every other year. But with 160 hr on it I would definately pull it if u haven’t.
SAB1 is offline   Reply With Quote
Old 02-13-2020, 09:08 AM   #8
The Real BigGuy
Senior Member
 
Join Date: Apr 2004
Posts: 1,258
Thanks: 123
Thanked 455 Times in 274 Posts
Default

The marina that hauls and stores my boats recommends every other year for both the I/O outdrive & the outboard lower unit. I do both but question that the charge is the same for both.


Sent from my iPhone using Winnipesaukee Forum mobile app
The Real BigGuy is offline   Reply With Quote
Old 02-13-2020, 09:25 AM   #9
Dave R
Senior Member
 
Dave R's Avatar
 
Join Date: Jul 2004
Posts: 2,980
Thanks: 246
Thanked 739 Times in 440 Posts
Default

FWIW, drives are super easy to remove for the maintenance I described; it would be worth learning how to do it once to see if it's something you won't mind doing, assuming you have the means to work on the boat while it's ashore. For $460, you could buy all the tools you would ever need to do the work they will be doing. It ain't rocket surgery and the skills you learn could end up saving a vacation.

For example:

I had a gimbal bearing fail 4 days into a 16 day vacation on Lake Champlain, in Summer 2017. I put the boat on the trailer around 1 PM, pulled the drive off in the boat ramp parking lot to confirm the bearing was shot, drove 3 hours back to my house (and special tools) in NH to drop off the boat, drove to West Marine and back to get a new bearing, pulled the old bearing out that night (mosquitoes ended that evening earlier than planned), installed the new bearing early the next morning, put the drive back on, and was back on Mallets Bay on Champlain by noon. Did it suck? Yeah it did, but I only lost 24 hours and the rest of the vacation was awesome. If I'd had to wait for someone else to do the work in peak season, I could have lost the whole vacation.
Dave R is offline   Reply With Quote
Old 02-13-2020, 09:37 AM   #10
Hillcountry
Senior Member
 
Hillcountry's Avatar
 
Join Date: Apr 2016
Location: In the hills
Posts: 2,405
Thanks: 1,658
Thanked 776 Times in 465 Posts
Default

Quote:
Originally Posted by TiltonBB View Post
The T stands for THOUSAND!
Lol...just realized I blew that as I saw your correction post!
Hillcountry is offline   Reply With Quote
Old 02-13-2020, 10:11 AM   #11
upthesaukee
Senior Member
 
upthesaukee's Avatar
 
Join Date: Jan 2003
Location: Alton Bay
Posts: 5,585
Blog Entries: 2
Thanks: 2,434
Thanked 1,945 Times in 1,075 Posts
Default I thought...

Quote:
Originally Posted by Hillcountry View Post
Lol...just realized I blew that as I saw your correction post!
I thought you had 10 $'s, which 10 x 1000 would have been a thousand. Yeah that's a stretch, but... .

After TiltonBB posted I went back and counted... there were 11. So much for the stretch. Hey, I tried.

Dave
__________________
I Live Here... I am always UPTHESAUKEE !!!!
upthesaukee is offline   Reply With Quote
The Following User Says Thank You to upthesaukee For This Useful Post:
Hillcountry (02-13-2020)
Old 02-13-2020, 05:25 PM   #12
8gv
Senior Member
 
8gv's Avatar
 
Join Date: Jan 2012
Posts: 2,059
Thanks: 63
Thanked 719 Times in 468 Posts
Default

Minimizing in-season down time is a strong incentive to do your own repairs!
8gv is online now   Reply With Quote
Old 02-13-2020, 08:06 PM   #13
SAB1
Senior Member
 
Join Date: Feb 2012
Location: Tuftonboro
Posts: 1,209
Thanks: 186
Thanked 310 Times in 227 Posts
Default

DaveR is spot on. It’s not hard to do. Plenty of YouTube videos to walk you thru. If someone was charging me $460 to do it I would laugh. You can pulll it inspect and grease it all and be back together in a couple hours. But I stand behind my comment, every other year is fine.
SAB1 is offline   Reply With Quote
Old 02-13-2020, 08:30 PM   #14
Sam603
Member
 
Join Date: Mar 2018
Posts: 24
Thanks: 10
Thanked 2 Times in 2 Posts
Default

I appreciate the advice and plan to do more of the preventative maintenance going forward. Thanks again


Sent from my iPhone using Winnipesaukee Forum mobile app
Sam603 is offline   Reply With Quote
Old 02-13-2020, 09:18 PM   #15
8gv
Senior Member
 
8gv's Avatar
 
Join Date: Jan 2012
Posts: 2,059
Thanks: 63
Thanked 719 Times in 468 Posts
Default

Quote:
Originally Posted by SAB1 View Post
DaveR is spot on. It’s not hard to do. Plenty of YouTube videos to walk you thru. If someone was charging me $460 to do it I would laugh. You can pulll it inspect and grease it all and be back together in a couple hours. But I stand behind my comment, every other year is fine.
I wonder if his marina is proactively replacing some parts regardless of their condition.
8gv is online now   Reply With Quote
Old 02-14-2020, 07:49 AM   #16
TiltonBB
Senior Member
 
Join Date: Feb 2005
Location: Gilford, NH and Florida
Posts: 2,955
Thanks: 673
Thanked 2,179 Times in 916 Posts
Default

Quote:
Originally Posted by 8gv View Post
I wonder if his marina is proactively replacing some parts regardless of their condition.
That is one of the decisions boat owners and marinas must make. Some people maintain their boat with an open check book. Other people just want the minimum amount of necessary work done.

If money was not a factor many people would tell the marina to do whatever they see fit and leave the decision to the marina. Their instructions are "if you see anything wrong please fix it". Other people want to be consulted and given a price quote before any work beyond what is already agreed to is done.

It helps to have a relationship with a marina that will know your boat and know you and your expectations. A comfort level and no surprises are both good things!
TiltonBB is offline   Reply With Quote
Old 02-14-2020, 09:12 AM   #17
Dave R
Senior Member
 
Dave R's Avatar
 
Join Date: Jul 2004
Posts: 2,980
Thanks: 246
Thanked 739 Times in 440 Posts
Default

Quote:
Originally Posted by TiltonBB View Post
That is one of the decisions boat owners and marinas must make. Some people maintain their boat with an open check book.
These are the folks I like to buy used boats from. That said, comprehensive spare parts inventory on a boat is also a good indicator of loving care by someone that might be a DIYer with a dusty checkbook.
Dave R is offline   Reply With Quote
Old 02-14-2020, 09:23 AM   #18
Dave R
Senior Member
 
Dave R's Avatar
 
Join Date: Jul 2004
Posts: 2,980
Thanks: 246
Thanked 739 Times in 440 Posts
Default

Quote:
Originally Posted by Sam603 View Post
I appreciate the advice and plan to do more of the preventative maintenance going forward. Thanks again


Sent from my iPhone using Winnipesaukee Forum mobile app
Feel free to ping me if you have any questions when you get into it.

Couple of tips:

If you buy any rubber parts or shift cables, buy only OEM stuff. The aftermarket bellows, impellers, and cables are typically sub-par. Local dealers often have decent prices on OEM stuff, BTW.

If you halve the coupler greasing interval, you can save yourself a ton of money. This is especially true if you spend a lot of time going slow with a stern drive. I know it's counter-intuitive, but low-speed operation really beats up the aluminum splines in the coupler. Drive has to come off and engine has to come out to replace the $400ish coupler... FWIW, you can't go wrong with these three rules on greasing splines: not enough grease is not enough grease, the right amount of grease is not enough grease, too much grease is the right amount of grease. Just wipe of the ooze with a rag. I like to hit both zerks, but that's probably over-kill.
Dave R is offline   Reply With Quote
Old 02-14-2020, 09:42 AM   #19
Biggd
Senior Member
 
Join Date: Nov 2016
Location: Waltham Ma./Meredith NH
Posts: 3,919
Thanks: 2,105
Thanked 1,133 Times in 716 Posts
Default

Quote:
Originally Posted by Dave R View Post
Feel free to ping me if you have any questions when you get into it.

Couple of tips:

If you buy any rubber parts or shift cables, buy only OEM stuff. The aftermarket bellows, impellers, and cables are typically sub-par. Local dealers often have decent prices on OEM stuff, BTW.

If you halve the coupler greasing interval, you can save yourself a ton of money. This is especially true if you spend a lot of time going slow with a stern drive. I know it's counter-intuitive, but low-speed operation really beats up the aluminum splines in the coupler. Drive has to come off and engine has to come out to replace the $400ish coupler... FWIW, you can't go wrong with these three rules on greasing splines: not enough grease is not enough grease, the right amount of grease is not enough grease, too much grease is the right amount of grease. Just wipe of the ooze with a rag. I like to hit both zerks, but that's probably over-kill.
And make sure you use marine grease not automotive grease. There is a difference! Automotive grease will mix with water and become milky where marine grease won't.
Biggd is online now   Reply With Quote
Old 02-14-2020, 02:41 PM   #20
Dave R
Senior Member
 
Dave R's Avatar
 
Join Date: Jul 2004
Posts: 2,980
Thanks: 246
Thanked 739 Times in 440 Posts
Default

Quote:
Originally Posted by Biggd View Post
And make sure you use marine grease not automotive grease. There is a difference! Automotive grease will mix with water and become milky where marine grease won't.
If you have water diluting grease on your coupler, you have bigger worries than what grease you used...
Dave R is offline   Reply With Quote
Old 02-14-2020, 06:10 PM   #21
Biggd
Senior Member
 
Join Date: Nov 2016
Location: Waltham Ma./Meredith NH
Posts: 3,919
Thanks: 2,105
Thanked 1,133 Times in 716 Posts
Default

Quote:
Originally Posted by Dave R View Post
If you have water diluting grease on your coupler, you have bigger worries than what grease you used...
When you're greasing the joints that are on the outside and under water you need marine grease so you might as well use it inside too.
Biggd is online now   Reply With Quote
Old 02-15-2020, 07:05 AM   #22
BroadHopper
Senior Member
 
BroadHopper's Avatar
 
Join Date: Oct 2004
Location: Laconia NH
Posts: 5,553
Thanks: 3,166
Thanked 1,096 Times in 790 Posts
Default Schedule.

Look at you engine maintenance schedule. Keep track of the number of hours you use your boat each season. That will give you an idea of maintenance schedule.
In may case, I average 70 hrs a year. I scheduled with my mechanic that I replace the water pump one year, full drive maintenance the second year, and full tune up the third year. Then repeat. I have over 2000 hrs on my '88 454 and stern drive without any major repairs.
__________________
Someday may never be an actual day.
BroadHopper is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 06:57 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

This page was generated in 0.28542 seconds