Go Back   Winnipesaukee Forum > Winnipesaukee Forums > General Discussion
Home Forums Gallery Webcams Blogs YouTube Channel Classifieds Register FAQ Members List Donate Today's Posts

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-18-2019, 10:22 AM   #20
MAXUM
Senior Member
 
MAXUM's Avatar
 
Join Date: Apr 2004
Location: Kuna ID
Posts: 2,755
Thanks: 244
Thanked 1,942 Times in 802 Posts
Default

As a "general rule" once the ice is set and has established a thickness of 12" or so you're likely going to be OK provided you're not the first person making tracks.... always like to let somebody else be "that guy".

Other areas to avoid... narrow pinch points between islands such as hole in the wall which does ice over but is NEVER safe - that can be misleading if snow covered. Any spot where there is an inflow or bridge crossing such as under the Long Island Bridge the inflows in Alton Bay under Rt 11 or the inflow from Mills Falls under Rt 3 in Meredith and the Weirs Beach channel just to name a few!

With snow coming and people starting to venture out on the lake it becomes clear what areas people are staying away from and for good reason. If you stay on well travelled routes you should be fine especially if you head out in the middle of the winter. Early and late in the ice season is where a lot of mistakes end up being made. Never hurts to stop and ask anyone ice fishing how thick the ice is as well, most fisherman are happy to tell you - and maybe a few whoppers about the big one that got away!
MAXUM is offline   Reply With Quote
The Following 2 Users Say Thank You to MAXUM For This Useful Post:
Mink Islander (01-18-2019), upthesaukee (01-18-2019)
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 03:23 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.

This page was generated in 0.21924 seconds