Getting Into Melvin Village Marina

Greene's Basin Girl · 10-06-2016, 02:10 AM

Have any of you boated into Melvin Village Marina lately? It is so shallow going in. Someone I know got his boat stuck there today and had to use an oar to move the boat. We store our boat there so I was just wondering????

thinkxingu · 10-06-2016, 04:26 AM

Quote:

Originally Posted by Greene's Basin Girl

Have any of you boated into Melvin Village Marina lately? It is so shallow going in. Someone I know got his boat stuck there today and had to use an oar to move the boat. We store our boat there so I was just wondering????

I emailed Kevin the other day and he said we should be fine with our 'toon if we trim up and keep to the center of the markers. I'll also be making sure that everyone's up front to keep it as level as possible--at that point, we only draft a couple feet at most. We're bringing Boatie Two in Saturday and will report back.

Sent from my XT1528 using Tapatalk

LIforrelaxin · 10-06-2016, 07:00 AM

The key at Melvin is definitely to stay in the middle of the markers...if you veer off to the sides it gets shallower very quickly... Through the summer the boat action tends to create a channel in the middle....

small boats and toons should still be all right, I wouldn't want to be bringing in any type of cuddy or cruiser....

thinkxingu · 10-08-2016, 12:56 PM

Just went in and out of MVM, and it's shallow--depth read 2' and tons of outdrive gashes--but we had no problems trimmed up and weight balanced.

Sent from my XT1528 using Tapatalk

10-06-2016, 02:10 AM	#1
Greene's Basin Girl Senior Member Join Date: Sep 2009 Location: Moultonborough, NH Posts: 1,515 Thanks: 394 Thanked 527 Times in 269 Posts	Getting Into Melvin Village Marina Have any of you boated into Melvin Village Marina lately? It is so shallow going in. Someone I know got his boat stuck there today and had to use an oar to move the boat. We store our boat there so I was just wondering????

10-06-2016, 07:00 AM	#3
LIforrelaxin Senior Member Join Date: May 2006 Location: Texas, Lake Ray Hubbard and NH, Long Island Winnipesaukee Posts: 2,870 Thanks: 1,037 Thanked 892 Times in 524 Posts	The key at Melvin is definitely to stay in the middle of the markers...if you veer off to the sides it gets shallower very quickly... Through the summer the boat action tends to create a channel in the middle.... small boats and toons should still be all right, I wouldn't want to be bringing in any type of cuddy or cruiser.... __________________ Life is about how much time you can spend relaxing... I do it on an island that isn't really an island.....

10-08-2016, 12:56 PM	#4
thinkxingu Senior Member Join Date: Jul 2014 Posts: 6,211 Thanks: 1,167 Thanked 2,048 Times in 1,271 Posts	Just went in and out of MVM, and it's shallow--depth read 2' and tons of outdrive gashes--but we had no problems trimmed up and weight balanced. Sent from my XT1528 using Tapatalk

The Following User Says Thank You to thinkxingu For This Useful Post:
Hillcountry (10-08-2016)