|
Home | Forums | Gallery | Webcams | Blogs | YouTube Channel | Classifieds | Calendar | Register | FAQ | Donate | Members List | Today's Posts | Search |
|
Thread Tools | Display Modes |
04-21-2015, 01:55 PM | #1 |
Senior Member
Join Date: Apr 2004
Location: Moultonborough
Posts: 109
Thanks: 28
Thanked 16 Times in 11 Posts
|
Experience with plastic or composite decking?
Hi, all...
We are on the verge of replacing our 14-year-old pressure treated deck (yes, it should have lasted longer, but that's a different story). Given that minimal maintenance and nice appearance are our priorities, we've decided to go with one of the new plastic or composite materials. I've checked Consumer Reports, but their last tests were done at least 3 years ago, and much has changed since then. I've browsed a couple of local lumber yards, and have found a bewildering array of brands and multiple models within each brand. Clearly, you pay more for deeper embossing and more color variation (i.e. more realistic looking). But beyond that, we haven't come to any conclusions. I'm wondering if anyone on the Forum has used this stuff and has some recommendations (or non-recommendations), things to watch out for, etc. Any advice would be appreciated. Thanks! |
04-21-2015, 02:08 PM | #2 |
Senior Member
Join Date: Feb 2012
Location: Tuftonboro
Posts: 1,168
Thanks: 182
Thanked 297 Times in 220 Posts
|
I have limited experience with it ...my brother inlaw used it around his pool (light grey in color). It is in full sun. I gets so hot in the afternoon you cant stand on it in bare feet. Other than that its great.
|
04-21-2015, 02:54 PM | #3 |
Senior Member
Join Date: Apr 2004
Location: Bear Island
Posts: 1,757
Thanks: 31
Thanked 429 Times in 203 Posts
|
We have used Azek decking and have been very happy with it. Because the color goes all the way through the material you can rip or mill without difficulty. Some decking is only a veneer with a different color inside.
|
04-21-2015, 03:06 PM | #4 |
Senior Member
Join Date: Oct 2004
Location: Laconia NH
Posts: 5,515
Thanks: 3,119
Thanked 1,090 Times in 784 Posts
|
Aluminum vs Composite
Composite are heavy and yes they get hot in the sun.
I vote for aluminum for lightness and it stays cool in the sun. Since Cresote is banned, wood has a short lifespan, even pressure treated.
__________________
Someday may never be an actual day. Last edited by BroadHopper; 04-21-2015 at 03:07 PM. Reason: added |
04-21-2015, 04:15 PM | #5 |
Senior Member
Join Date: Aug 2007
Location: South Down Shores
Posts: 1,939
Thanks: 533
Thanked 568 Times in 334 Posts
|
I have a Timbertech deck that I'm pretty happy with (going on 3 years now).
The Azek material BI mentioned is probably the "best", but at significant cost. Timbertech is sort of like "trex" wrapped in "azek". Many of the pure composite decking materials can have problems with swelling and deterioration over time. Timbertech is a composite core, with a PVC outer wrapping. It looks better (IMO) than the normal composites and is priced in between trex-type decks and Azek. When I researched this a couple of years ago, it seemed that the environment where the deck was going to be installed played a bit part. Most of the materials had various trade-offs in terms of shade/moisture exposure, sun fading, resistance to chemicals and so forth.
__________________
[insert witty phrase here] |
The Following User Says Thank You to brk-lnt For This Useful Post: | ||
BUTCHYBOY (04-21-2015) |
Sponsored Links |
|
04-21-2015, 06:14 PM | #6 |
Senior Member
Join Date: Apr 2008
Location: Moultonborough
Posts: 735
Thanks: 4
Thanked 254 Times in 166 Posts
|
I posted this for a similar thread on hearth.com:
We used Fiberon composite decking on ours, now about four years old and still looking good. It has the grooves for use of hidden fasteners. If you use that type of fastening system, however, be sure the deck framing underneath is adequately braced against racking. The use of hidden fasteners doesn't provide suffient racking resistance. When selecting a product, check also the maximum allowed joist spacing. Some require no more than 16" oc, or 12" if the decking is laid diagonally to the framing. |
04-22-2015, 07:10 AM | #7 |
Senior Member
Join Date: Aug 2013
Location: Bedford, NH; Meredith, NH
Posts: 866
Thanks: 233
Thanked 768 Times in 302 Posts
|
vote for Azek....
We used Azek on the panels of our crank-up dock. Love it. No more splinters and never have to worry about it again. It also has some texture, so there is no slipping, even when wet.
|
04-22-2015, 07:48 AM | #8 |
Senior Member
Join Date: Mar 2003
Location: Merrymeeting Lake, New Durham
Posts: 2,218
Thanks: 299
Thanked 795 Times in 365 Posts
|
I used this on ours. Over 10 years old now and still in great shape. The honeycomb underside keeps it light, and it does not absorb heat like some do.
It was expensive, but given how long it's lasted and the shape it's still in, a good investment as far as I'm concerned. http://www.michiganlakeproducts.com/...ksmichigan.php |
04-22-2015, 08:17 AM | #9 |
Senior Member
Join Date: Feb 2008
Location: Gilford, NH / Welch Island
Posts: 5,944
Thanks: 2,292
Thanked 4,953 Times in 1,920 Posts
|
Here's a good thread covering this topic...
http://www.winnipesaukee.com/forums/...posite+decking Dan
__________________
It's Always Sunny On Welch Island!! |
04-22-2015, 02:37 PM | #10 | |
Senior Member
Join Date: Jan 2010
Posts: 250
Thanks: 55
Thanked 61 Times in 44 Posts
|
Quote:
|
|
Bookmarks |
|
|