|
Home | Forums | Gallery | Webcams | Blogs | YouTube Channel | Classifieds | Calendar | Register | FAQ | Donate | Members List | Today's Posts | Search |
|
Thread Tools | Display Modes |
05-24-2007, 07:50 PM | #1 |
Member
Join Date: Apr 2005
Posts: 30
Thanks: 0
Thanked 0 Times in 0 Posts
|
Can't blow my own horn
'Cause it don't work. Replaced the fuse, tried all the connections and it still doesn't work. Any thoughts?
Ken |
05-24-2007, 09:38 PM | #2 |
Senior Member
Join Date: Apr 2004
Location: Suncook, NH, but at The Lake at Heart
Posts: 2,612
Thanks: 1,082
Thanked 433 Times in 209 Posts
|
Just have to break down and buy a new one. I did a week ago as mine failed to work on my first trip out.
__________________
Just Sold At the lake the stress of daily life just melts away. Pro Re Nata |
05-25-2007, 04:25 AM | #3 |
Senior Member
Join Date: Apr 2004
Location: Lakes Region
Posts: 547
Thanks: 9
Thanked 29 Times in 20 Posts
|
do some troubleshooting..
the failure point could be the wiring, switch, or the horn itself. Changing parts may well fix the problem, but you could end up buying parts you don't need. if you have access to a multi-tester or test light, connect it across the horn, and press the horn switch to see if power gets to the horn. if it does, then change the horn. if it doesn't _ work back toward the switch to see if that is OK.. proceed to the power source/fuse box,and eventually you will discover the faulty component.
|
05-25-2007, 08:27 AM | #4 |
Senior Member
Join Date: Mar 2004
Location: Piscataway, NJ
Posts: 1,030
Thanks: 2
Thanked 46 Times in 24 Posts
|
had this problem
We had the same type of problem. The horn made avery low sound kind of like a sick goose. A quick rap on the back of the horn helped for a while.
Check to see if there is power to the horn. Replace horn if needed or just shout BEEP when the button in pushed. |
05-27-2007, 02:23 AM | #5 | |
Senior Member
Join Date: Jan 2005
Location: Florida (Sebring & Keys), Wolfeboro
Posts: 5,788
Thanks: 2,085
Thanked 742 Times in 532 Posts
|
My 2˘
Quote:
Did you replace a good fuse or a blown fuse? Does the horn "click", or make any sound at all? A blown fuse should indicate a bad horn, switch, or an intermittant "swinging short" in the wiring. I'd start in the middle—at the horn button. If dash-mounted, the back of the switch should have two terminals: try using a connector across those two terminals with the ignition on. The horn should work then, although the fuse could blow again if the problem is the horn or between the switch and the horn. Otherwise, remove the horn itself and jump the terminals firmly at the battery. Use insulated tools, as there can be a minor but uncomfortable shock generated. (Also, sometimes a horn benefits from a "jump start" for the new season ). If it works while jumped at the battery, then the problem is between the horn and the battery. If the horn only "tries" to beep, I'd replace it. Again, start at the horn button.
__________________
Every MP who enters Winter Harbor will pass by my porch of 67 years... |
|
Sponsored Links |
|
Bookmarks |
|
|