Go Back   Winnipesaukee Forum > Winnipesaukee Forums > Diving Winnipesaukee
Home Forums Gallery Webcams Blogs YouTube Channel Classifieds Calendar Register FAQDonate Members List Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 08-14-2011, 09:15 AM   #1
Diver1111
Senior Member
 
Join Date: Jun 2005
Location: Exeter NH
Posts: 599
Thanks: 0
Thanked 1,030 Times in 226 Posts
Default Alton Barge

I've been looking for this barge for about 2 years. Found it recently. My search was based on information relayed to me by a man who dove in the 1960's and was looking for it as well, never found it. He wasn't sure if it existed either but now we know it does-thank you-you know who you are. I will not release its location as it's delicate and the most intact (old) wreck I have found yet in Winni, nearly 100%. I am afraid it will get trashed if it's dived by the wrong people. I've seen what happens and it's bad. Besides there is nothing to take home that won't be a fragment-and once out of water it will disintegrate unless steps are taken to prevent this natural process. There is nothing of monetary value to take but that won't stop some.

Barge is about 65 feet long, 25 feet wide, and the sides stand about 5 feet off the bottom. Classic flat-faced sloping bow and stern for a barge. Tools, a cement mixer on a trailer set-up, a "one-lunger" engine complete with flywheels, bags of concrete still stacked 7 high, piles of stone on deck next to a pile on sand-clearly they were going to build something. This is not ballast stone such as what can be found in the hold of the Lady of the Lake. These vessels don’t really have “holds”, more like crawl spaces. Nifty wooden deck cleats 2 feet wide. Weight of sand and stone piles is bending the deck down a bit.

What I don’t understand is why it is complete with machinery, tools, and material and how bags of concrete stacked 7 high never toppled over. No salvage effort that I can see, as the cement mixer engine is still there among other components; Perhaps it wasn’t worth it, perhaps it broke anchor and sank by itself; It was suggested I look for towing cable or chain (none), spuds to secure it in position at a site (none).

Dive was dark hence the dark video, certainly not unusual but I wish it was clearer-that's what we typically have to work with. My thanks to camerman Lea Nichols, again. Lea has shot all of the videos I've posted.

If anyone has background information on such a barge in Alton please contact me.

http://www.youtube.com/watch?v=r-xarqwG3q0
Attached Images
                    
Diver1111 is offline   Reply With Quote
The Following 23 Users Say Thank You to Diver1111 For This Useful Post:
AC2717 (08-15-2011), bclaker (09-03-2011), billy (06-27-2023), BroadHopper (06-28-2023), DRH (08-14-2011), garysanfran (06-27-2023), Grant (08-16-2011), Hubbles (08-17-2011), ITD (08-14-2011), Jonas Pilot (08-14-2011), Just Sold (08-14-2011), Kamper (08-15-2011), Pepper (08-14-2011), Rattlesnake Gal (08-15-2011), RLW (08-14-2011), secondcurve (08-14-2011), Senter Cove Guy (08-15-2011), SharkBaitDiving (08-01-2012), SteveA (09-03-2011), Sunset Bob (08-15-2011), Tallyho (08-15-2011), trfour (08-14-2011), upthesaukee (08-14-2011)
Old 08-14-2011, 06:28 PM   #2
secondcurve
Senior Member
 
Join Date: Jan 2005
Posts: 2,102
Thanks: 1,299
Thanked 558 Times in 287 Posts
Default

Approximately what year do you think it went down?
secondcurve is offline   Reply With Quote
Old 08-14-2011, 08:07 PM   #3
RLW
Senior Member
 
RLW's Avatar
 
Join Date: Jul 2002
Location: Alton Bay on the mountain by a lake
Posts: 2,023
Thanks: 563
Thanked 444 Times in 311 Posts
Default

Thanks for posting the pictures. It is very interesting and the pictures were nice and clear from that depth. It is amazing that the bags of concrete were still intact and till stacked as you said. Thanks again for posting.
__________________
There is nothing better than living on Alton Mountain & our grand kids visits.

Last edited by RLW; 08-14-2011 at 08:08 PM. Reason: mis-spell
RLW is offline   Reply With Quote
Old 08-14-2011, 10:42 PM   #4
KTO
Senior Member
 
KTO's Avatar
 
Join Date: Aug 2004
Location: Meredith, NH
Posts: 391
Thanks: 30
Thanked 117 Times in 26 Posts
Default

Wow those pictures are amazing and I'd love to see this in person. I know you're not up for giving the coordinates, but still it's amazing.

Stinks that some people can ruin it for others. Good find, though!
KTO is offline   Reply With Quote
Old 08-15-2011, 08:56 AM   #5
Kamper
Senior Member
 
Kamper's Avatar
 
Join Date: Jul 2005
Location: Thornton's Ferry
Posts: 1,297
Thanks: 67
Thanked 166 Times in 126 Posts
Default

It's like a time-capsule! My bet is that it was well balanced but overloaded, and swamped.

I don't blame you for keeping that to yourself for now. It's doubtful anyone will want to take the neccessary steps to recover and preserve it. Keep taking pictures in case some history buff ever wants to re-produce it or make a scale model.

Thanks!
Kamper is offline   Reply With Quote
Sponsored Links
Old 08-19-2011, 09:44 PM   #6
Diver1111
Senior Member
 
Join Date: Jun 2005
Location: Exeter NH
Posts: 599
Thanks: 0
Thanked 1,030 Times in 226 Posts
Default Alton barge

My guess-and that's about what it is-is that it's been there for 80+ years; Looks like it was built perhaps 1860 to 1900.
Diver1111 is offline   Reply With Quote
The Following User Says Thank You to Diver1111 For This Useful Post:
secondcurve (08-27-2011)
Old 08-27-2011, 02:59 PM   #7
Grant
Senior Member
 
Grant's Avatar
 
Join Date: Jul 2002
Location: Pennsyltuckey, Tuftonboro, Moultonborough
Posts: 1,495
Thanks: 355
Thanked 224 Times in 120 Posts
Default

Dove this on Tuesday and it really is in remarkable shape. No signs of any breaches in the hull (at least the portions visible), and it definitely sank straight down.

One item of note: When we surfaced from the hour-plus dive, we all remarked on how temperature was never an issue. 66 degrees average. Contrast this with the water temp at the Weirs piledriver barge -- roughly the same depth -- which seems to always be in the high 40s.

A great find and an awesome dive.
__________________
"When I die, please don't let my wife sell my dive gear for what I told her I paid for it."
Grant is offline   Reply With Quote
Old 08-28-2011, 11:00 PM   #8
scubajay1153
Senior Member
 
Join Date: Dec 2006
Location: Gilford
Posts: 93
Thanks: 2
Thanked 8 Times in 7 Posts
Default

Very cool! I think I may have been getting out at Clark's Point a few weeks ago when you and a buddy where getting in. You side mounts look familiar! I was with a female buddy of mine.....I will have to look at the log and see which date....
scubajay1153 is offline   Reply With Quote
Old 09-02-2011, 09:08 AM   #9
Grant
Senior Member
 
Grant's Avatar
 
Join Date: Jul 2002
Location: Pennsyltuckey, Tuftonboro, Moultonborough
Posts: 1,495
Thanks: 355
Thanked 224 Times in 120 Posts
Default

Quote:
Originally Posted by Diver1111 View Post
My guess-and that's about what it is-is that it's been there for 80+ years; Looks like it was built perhaps 1860 to 1900.
Did you notice the plate on the outside of the cement mixer? Facing up, on a curved part -- still very readable. I wiped it clean with my glove (appears to be brass). I reads:

Webster Tri-Polar Oscillator
The Webster Electric Co.
Racine, Wisconsin USA

Turns out it's the magneto. And in the picture below, you can see where the label plate is. From some quick research, it looks like these things came on the market in the 1910-15 timeframe. So this wreck could easily be 80-100 years old. Another clue could be those enormous wooden cleats on the deck.
Attached Images
 
__________________
"When I die, please don't let my wife sell my dive gear for what I told her I paid for it."
Grant is offline   Reply With Quote
Old 09-02-2011, 02:40 PM   #10
Ride & Dive
Senior Member
 
Ride & Dive's Avatar
 
Join Date: Jul 2011
Posts: 56
Thanks: 41
Thanked 9 Times in 6 Posts
Default Video of the Oscillator

I thought this was interesting.

http://www.youtube.com/watch?v=KbCRDWJjOkE

Ride & Dive is offline   Reply With Quote
Old 09-02-2011, 03:13 PM   #11
Diver1111
Senior Member
 
Join Date: Jun 2005
Location: Exeter NH
Posts: 599
Thanks: 0
Thanked 1,030 Times in 226 Posts
Default Oscillator

Nice call Grant and the video was very interesting thanks Ride & Dive. Do you think I looked myself for a plate on the engine? Noooooooooooo.

My video guy Lea thought it was a "one-lunger" engine that fired something like...every four cycles or so-that video confirms that something is happening every few seconds. Would that be a firing sequence when that thing moves? What is the ignition source? Gasoline?
Diver1111 is offline   Reply With Quote
Old 09-02-2011, 08:23 PM   #12
Grant
Senior Member
 
Grant's Avatar
 
Join Date: Jul 2002
Location: Pennsyltuckey, Tuftonboro, Moultonborough
Posts: 1,495
Thanks: 355
Thanked 224 Times in 120 Posts
Default

Quote:
Originally Posted by Diver1111 View Post
Nice call Grant and the video was very interesting thanks Ride & Dive. Do you think I looked myself for a plate on the engine? Noooooooooooo.

My video guy Lea thought it was a "one-lunger" engine that fired something like...every four cycles or so-that video confirms that something is happening every few seconds. Would that be a firing sequence when that thing moves? What is the ignition source? Gasoline?
Got me. I was just looking at the "engine" area of the mixer, and noticed the curved area on the magneto. Thought I saw some shiny stuff under the gunk and ran my finger along it -- and there were the letters. Had to read it over and over to remember the company, as I'd left my dive slate up on the boat. Didn't think to look it up until this morning. (Another "DUH")

Amazing what you can find via Google. And, yes, i saw that video during the search.

I suppose all that sand and till on the barge (where the deck caves in) was part of the cement making process? Otherwise, I don't see how it could've ended up on the deck in that quantity. I want to dive this again -- and bring my bigger light next time.
__________________
"When I die, please don't let my wife sell my dive gear for what I told her I paid for it."
Grant is offline   Reply With Quote
Old 09-02-2011, 08:34 PM   #13
Grant
Senior Member
 
Grant's Avatar
 
Join Date: Jul 2002
Location: Pennsyltuckey, Tuftonboro, Moultonborough
Posts: 1,495
Thanks: 355
Thanked 224 Times in 120 Posts
Default

Okay -- I just looked at the video again. In the frame between 3:32 and 3:40, the curved part to the left of the wheel, as you're looking at it, is the magneto.
__________________
"When I die, please don't let my wife sell my dive gear for what I told her I paid for it."
Grant is offline   Reply With Quote
Old 09-03-2011, 12:29 PM   #14
Tallyho
Senior Member
 
Tallyho's Avatar
 
Join Date: Jun 2006
Posts: 312
Thanks: 439
Thanked 16 Times in 13 Posts
Default Alton Barge

I believe that I have identified the mixer on the barge as a "Jaeger Tilting Mixer", made by Jaeger Machine Co. of Columbus, OH. Judging from the video and still shots taken by Hans and Lea, everything is in the right place for it to be a Jaeger, including the engine, plus their patents go back to 1917. There are quite a few pictures and some ads on Smokstak.com, if anyone is interested.
Tallyho is offline   Reply With Quote
Old 09-06-2011, 08:29 AM   #15
Ride & Dive
Senior Member
 
Ride & Dive's Avatar
 
Join Date: Jul 2011
Posts: 56
Thanks: 41
Thanked 9 Times in 6 Posts
Default

Quote:
Originally Posted by Diver1111 View Post
Nice call Grant and the video was very interesting thanks Ride & Dive. Do you think I looked myself for a plate on the engine? Noooooooooooo.

My video guy Lea thought it was a "one-lunger" engine that fired something like...every four cycles or so-that video confirms that something is happening every few seconds. Would that be a firing sequence when that thing moves? What is the ignition source? Gasoline?

Found this read while doing a quick search. It explains how the magneto ignition works and has a pic of this exact unit about 1/2 way down the page.

http://www.old-engine.com/maglma.htm
Ride & Dive is offline   Reply With Quote
The Following User Says Thank You to Ride & Dive For This Useful Post:
Senter Cove Guy (09-06-2011)
Old 06-27-2023, 02:07 PM   #16
Diver1111
Senior Member
 
Join Date: Jun 2005
Location: Exeter NH
Posts: 599
Thanks: 0
Thanked 1,030 Times in 226 Posts
Default Side scan sonar shots of the barge

Shots attached and one of a school of fish.

For anyone running Side-Imaging aka Side Scan Sonar note that any time the shadow of an object is not connected to/touching that object, it means that the object is up in the water column.

The fish are not attached to the shadow hence I know they are off the bottom. One shot shows the school close to the bottom-so close it appears the shadow and the fish are touching.
Attached Images
    
Diver1111 is offline   Reply With Quote
The Following 2 Users Say Thank You to Diver1111 For This Useful Post:
Grant (06-27-2023), Senter Cove Guy (06-28-2023)
Old 06-27-2023, 02:28 PM   #17
Grant
Senior Member
 
Grant's Avatar
 
Join Date: Jul 2002
Location: Pennsyltuckey, Tuftonboro, Moultonborough
Posts: 1,495
Thanks: 355
Thanked 224 Times in 120 Posts
Default

We revisited that Alton barge in 2020, and the deck had collapsed. Also -- the school of rock bass has multiplied many times over (like everywhere else in the Lake).

Video: https://youtu.be/oebRdP07u-Y
__________________
"When I die, please don't let my wife sell my dive gear for what I told her I paid for it."
Grant is offline   Reply With Quote
Old 06-27-2023, 02:39 PM   #18
Diver1111
Senior Member
 
Join Date: Jun 2005
Location: Exeter NH
Posts: 599
Thanks: 0
Thanked 1,030 Times in 226 Posts
Default 2nd school of fish

I uploaded 4 images, 3 appeared. 4th of some fish, attached.
Attached Images
 
Diver1111 is offline   Reply With Quote
The Following User Says Thank You to Diver1111 For This Useful Post:
Grant (06-27-2023)
Old 06-29-2023, 07:31 AM   #19
webmaster
Moderator
 
webmaster's Avatar
 
Join Date: Jun 2002
Posts: 2,442
Blog Entries: 1
Thanks: 451
Thanked 3,777 Times in 833 Posts
Default

Hey Hans,

I have been replying to your emails about the problem displaying your images but I see this morning that they all were rejected by an overly aggressive security program (Cloudmark Sender Intelligence) on your email system that is refusing them because some other server on my hosting service has sent spam.

I really don't understand why the images appear sometimes but not others. This is the first time I've seen that and other attachments seem to all be working fine.

I'll try a few more things but this morning the attachments all seem to be appearing.
webmaster is offline   Reply With Quote
Old 06-29-2023, 01:57 PM   #20
Diver1111
Senior Member
 
Join Date: Jun 2005
Location: Exeter NH
Posts: 599
Thanks: 0
Thanked 1,030 Times in 226 Posts
Default

Thank you Don.

Re:
- Emails-I didn't get anything but that's OK because you are on it;

- Firefox browser (the only one I use for lots of stuff including Winni.com) shows w/o logging on as of now, 1 image;

- Firefox browser once I log on to Winni.com shows all 4 images;

- Vivaldi browser (what I use for everything else like Banking) shows 1 barge image and the school of fish image twice, nothing else;

- Vivaldi browser (what I use for everything else like Banking) once I log on, shows all 4 images plus the scool of fish twice;.

- I will not use Microsoft Edge nor any Google browser;

I have never seen this problem before with the site-everything works great- hope this helps thanks.
HH
Diver1111 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 02:31 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

This page was generated in 0.31161 seconds