Go Back   Winnipesaukee Forum > Winnipesaukee Forums > Home, Cottage or Land Maintenance
Home Forums Gallery Webcams Blogs YouTube Channel Classifieds Calendar Register FAQDonate Members List Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 02-11-2020, 11:02 AM   #1
Hillcountry
Senior Member
 
Hillcountry's Avatar
 
Join Date: Apr 2016
Location: In the hills
Posts: 2,338
Thanks: 1,566
Thanked 761 Times in 456 Posts
Default Wood stove vs Pellet

We have a beautiful, Woodstock Soapstone wood stove (built right here in Lebanon NH) and as we age are using wood less and less (expense,
work to move, stack etc.)
That said, is it worth selling the soapstone stove and installing a pellet stove?
I know you still have to buy and carry/move bags of pellets, which I have no problem with as I am capable of heavy work.
Surely, someone has weighed both and made decisions on this...
Hillcountry is online now   Reply With Quote
Old 02-11-2020, 11:34 AM   #2
thinkxingu
Senior Member
 
thinkxingu's Avatar
 
Join Date: Jul 2014
Posts: 5,937
Thanks: 1,152
Thanked 1,957 Times in 1,209 Posts
Default

I think there are too many variables to make the comparison objective. We use wood because I get it for free and don't mind processing it, I like the silence, I like the smell, I like that it doesn't use electricity, and I like the look.

Sent from my SM-G950U using Winnipesaukee Forum mobile app
thinkxingu is offline   Reply With Quote
The Following 2 Users Say Thank You to thinkxingu For This Useful Post:
ApS (02-11-2020), Hillcountry (02-11-2020)
Old 02-11-2020, 11:35 AM   #3
NH.Solar
Senior Member
 
NH.Solar's Avatar
 
Join Date: Jan 2017
Location: Jackson Pond, New Hampton
Posts: 210
Thanks: 37
Thanked 128 Times in 69 Posts
Default

With most pellet stoves if the power goes out, there too goes your heat. Do you have some sort of backup heat source?
I use a pilot lit propane space heater in the basement as my backup and it works admirably at all times. A lot of good woodstove companies, Woodstock included, make gas stoves that look and retain heat just like a woodstove, you could probably drop one right in place of the lovely old soapstone and never worry about lugging fuel again
__________________
Peter
NH Solar
NH.Solar is offline   Reply With Quote
The Following User Says Thank You to NH.Solar For This Useful Post:
Hillcountry (02-11-2020)
Old 02-11-2020, 11:45 AM   #4
CaptT820
Senior Member
 
Join Date: Mar 2012
Posts: 122
Thanks: 86
Thanked 46 Times in 27 Posts
Default Wood

As others have said it comes down to convenience and cost. For us, I end up with the same argument every time, I cannot cut down a pellet tree. Meaning I have to rely on others for part of the process. And... as others have said, you need electricity to properly run a pellet stove. Get our soapstone stove up to 600°F and let it radiate all day.
We also get most of our wood for free and process it ourselves.
CaptT820 is offline   Reply With Quote
The Following 2 Users Say Thank You to CaptT820 For This Useful Post:
ApS (02-11-2020), Hillcountry (02-12-2020)
Old 02-11-2020, 12:01 PM   #5
Biggd
Senior Member
 
Join Date: Nov 2016
Location: Waltham Ma./Meredith NH
Posts: 3,729
Thanks: 1,941
Thanked 1,065 Times in 672 Posts
Default

I hate cutting and splitting wood. I will buy it in the spring all cut and split. I don't mind stacking it and I have a tractor so it makes lugging it into the garage easy.
I have a friend of mine that has a pellet stove and when the electricity goes out so does his heat. Plus he loads up one stall of his garage with pellets as you get a better price buying in bulk. You have to have dry space to store pellets.
I'm not giving up my garage space for pellets. I can keep the wood outside covered up and just bring in what I need for a few days which doesn't take up too much space.
There are pros and cons to each so you have to weigh what's best for your situation.

Last edited by Biggd; 02-11-2020 at 12:44 PM.
Biggd is offline   Reply With Quote
The Following User Says Thank You to Biggd For This Useful Post:
Hillcountry (02-12-2020)
Sponsored Links
Old 02-11-2020, 12:22 PM   #6
SAB1
Senior Member
 
Join Date: Feb 2012
Location: Tuftonboro
Posts: 1,162
Thanks: 182
Thanked 297 Times in 220 Posts
Default

I've done both. I like cutting and splitting wood but man that takes a lot of time to which I don't always have. Overall I say the pellets are less work but they do create there own mess with dust just as a wood stove does as well hauling wood into the house. The nice thing about the pellets is you can toss a bag or two in the hopper and take off the day, even overnight if you have an hopper extension, and it takes care of itself. That is nice. You do need back up power though. Propane tends to be expensive so I save a bit in NH. I have natural gas in Mass and honestly for the price of pellets heating with natural gas isn't going to cost me much more now a days. Pellets can be stored outside but trudging out in the snow to get them isn't always fun. If you have a wood stove IMO I would stick with it. Pellet stoves are not cheap and then you would likely have to buy some piping etc to hook it up. On a cold morning when you step outside the door nothing smells as good as a wood stove............except the bacon your neighbor is frying...........
SAB1 is offline   Reply With Quote
The Following User Says Thank You to SAB1 For This Useful Post:
Hillcountry (02-11-2020)
Old 02-11-2020, 12:43 PM   #7
Biggd
Senior Member
 
Join Date: Nov 2016
Location: Waltham Ma./Meredith NH
Posts: 3,729
Thanks: 1,941
Thanked 1,065 Times in 672 Posts
Default

Quote:
Originally Posted by SAB1 View Post
I've done both. I like cutting and splitting wood but man that takes a lot of time to which I don't always have. Overall I say the pellets are less work but they do create there own mess with dust just as a wood stove does as well hauling wood into the house. The nice thing about the pellets is you can toss a bag or two in the hopper and take off the day, even overnight if you have an hopper extension, and it takes care of itself. That is nice. You do need back up power though. Propane tends to be expensive so I save a bit in NH. I have natural gas in Mass and honestly for the price of pellets heating with natural gas isn't going to cost me much more now a days. Pellets can be stored outside but trudging out in the snow to get them isn't always fun. If you have a wood stove IMO I would stick with it. Pellet stoves are not cheap and then you would likely have to buy some piping etc to hook it up. On a cold morning when you step outside the door nothing smells as good as a wood stove............except the bacon your neighbor is frying...........
You know what they say about wood, you get warm multiple times cutting, splitting, stacking, and burning.
Biggd is offline   Reply With Quote
Old 02-11-2020, 02:59 PM   #8
Poor Richard
Senior Member
 
Poor Richard's Avatar
 
Join Date: Aug 2017
Location: The humbling river
Posts: 301
Thanks: 42
Thanked 78 Times in 55 Posts
Default

Concerning the question around the pellet stove during power outages, a small generator and a line conditioner solves that issue. The key is the line conditioner and when I say "small generator", I'm talking under under 2kv. Just something enough to run the heat element, kick the blower on and power the electronics.


Personally, I prefer a wood stove. There's a certain kind of heat that a pellet stove simply cannot offer....at least not the ones I've seen.

As already stated, the pros and cons must be weighed by each person for their unique scenario. To me, the processing of wood in order to heat my house is "worth" it.
Poor Richard is offline   Reply With Quote
The Following User Says Thank You to Poor Richard For This Useful Post:
Hillcountry (02-11-2020)
Old 02-11-2020, 03:08 PM   #9
thinkxingu
Senior Member
 
thinkxingu's Avatar
 
Join Date: Jul 2014
Posts: 5,937
Thanks: 1,152
Thanked 1,957 Times in 1,209 Posts
Default

One more thing to consider, Hill, is that the pellet stove may perform much more like a steel wood stove—a molten lead ball with a fan—as opposed to what should be a much more evenly dispersed soapstone pattern (at least that's my experience with my Hearthstone and Englander stoves and my brother's pellet stove).

Sent from my SM-G950U using Winnipesaukee Forum mobile app
thinkxingu is offline   Reply With Quote
The Following User Says Thank You to thinkxingu For This Useful Post:
Hillcountry (02-11-2020)
Old 02-11-2020, 06:50 PM   #10
Hillcountry
Senior Member
 
Hillcountry's Avatar
 
Join Date: Apr 2016
Location: In the hills
Posts: 2,338
Thanks: 1,566
Thanked 761 Times in 456 Posts
Default

I should have mentioned that I do have a whole house generator and a propane fired boiler...no worries about being without heat. We love the wood stove and all the pleasant things about it as well. We have only used the wood stove sparingly this winter to “warm up the house” before bed. Turning up the thermostat is a lot easier! We ran out of wood in January (what we had scrounged from ice damage last winter) and then burned lots of leftover scrap wood from an addition we built...got a lot of heat out of that stuff for free! Once that soapstone heats up it radiates a long time. Anyway, we have a great spot for a stove basically a center chimney log home and was thinking pellets might give us “some heat” without all the dirty work of wood. I also have a covered porch where I can store a ton or
more of pellets easily right outside the door near the stove. Very convenient.
Guess we’ll stop at some of the stove shops and have a look at the pellet burners.
We also acres and acres of hardwoods that we could cut down for firewood...would never have to pay a cent for wood if we went that route....just pay in blood and sweat!
Hillcountry is online now   Reply With Quote
Old 02-11-2020, 06:54 PM   #11
Hillcountry
Senior Member
 
Hillcountry's Avatar
 
Join Date: Apr 2016
Location: In the hills
Posts: 2,338
Thanks: 1,566
Thanked 761 Times in 456 Posts
Default

Quote:
Originally Posted by Biggd View Post
You know what they say about wood, you get warm multiple times cutting, splitting, stacking, and burning.
True enough!
Hillcountry is online now   Reply With Quote
Old 02-11-2020, 08:09 PM   #12
MAXUM
Senior Member
 
MAXUM's Avatar
 
Join Date: Apr 2004
Location: Kuna ID
Posts: 2,755
Thanks: 246
Thanked 1,942 Times in 802 Posts
Default

Another thing to consider, a while back there was a major interruption in the pellet supply where a big producer had a factory fire and could not supply any product. As a result there was a run on inventory and prices for pellets went through the roof, if you could find some at that time.

I burn wood and while it is a lot of work the supply is always there and like everyone else I scrap most of mine for free. That said I do have a pretty good amount invested in a couple really good chain saws and a log splitter. Makes all the difference having the right tools.
MAXUM is offline   Reply With Quote
The Following User Says Thank You to MAXUM For This Useful Post:
Hillcountry (02-12-2020)
Old 02-11-2020, 08:57 PM   #13
SteveO123
Senior Member
 
Join Date: Jul 2010
Location: Laconia, Lake Opechee
Posts: 174
Thanks: 286
Thanked 86 Times in 45 Posts
Default Wood stove vs Pellet

20 years ago I enjoyed moving 3 tons of pellets from the storage shed to the stove. What a great way to stay in shape!! And to stay warm!...

Now age 60 something and fuggetiboutit... we were happy to move away from that stove and pellet hauling. Daily cleaning, ash dumping and ehhhh. No bargain either with pellet prices too. It Was fun then, but glad we left it in our other home when we retired to the Lake. We have a wonderful propane insert with a remote thermostat now!!!

Stay warm, and happy!
Steve
SteveO123 is offline   Reply With Quote
The Following User Says Thank You to SteveO123 For This Useful Post:
Hillcountry (02-12-2020)
Old 02-11-2020, 09:03 PM   #14
SAB1
Senior Member
 
Join Date: Feb 2012
Location: Tuftonboro
Posts: 1,162
Thanks: 182
Thanked 297 Times in 220 Posts
Default

Not far behind you there Steveo ! I seem to get enuff exercise without hauling pellets.
SAB1 is offline   Reply With Quote
Old 02-11-2020, 09:51 PM   #15
ishoot308
Senior Member
 
Join Date: Feb 2008
Location: Gilford, NH / Welch Island
Posts: 5,891
Thanks: 2,274
Thanked 4,904 Times in 1,897 Posts
Default

Hill,

You probably know this but just in case...there is no savings burning pellets. Actually, at last for me, it’s cheaper To simply turn the thermostat on and burn oil...

Dan
__________________
It's Always Sunny On Welch Island!!
ishoot308 is offline   Reply With Quote
The Following User Says Thank You to ishoot308 For This Useful Post:
Hillcountry (02-12-2020)
Old 02-11-2020, 10:15 PM   #16
NHskier
Senior Member
 
Join Date: Aug 2006
Posts: 284
Thanks: 40
Thanked 33 Times in 30 Posts
Default

We had a wood stove in our first house and loved the heat but it was a lot of work. Years later in our second house we installed a pellet stove fireplace insert since dealing with pellets was much easier and cleaner. The stove ran well for the first two years but after that was nothing but problems. We had several different techs clean it and try to get it running well, without luck. Last year it was running very poorly and I just couldn't keep it going without the burn pot quickly loading up. We'd had it thoroughly cleaned over the previous summer and it was still awful. We barely made it through a half-ton of pellets because I couldn't keep it running to any real extent, and then the feed mechanism failed right about this time last year.

Enough was enough with that stove. I had zero interest in getting it repaired so we started looking at new stoves, particularly Harmon based on reputation. But we also decided to explore propane inserts. We found that having a propane tank installed and lines run by Eastern was very reasonable, and ended up going that route. We absolutely love having the convenience of pushing a button on the remote control to start, adjust flame height and fan settings, and turn off whenever we want. Being able to run it just for an hour to knock the chill out or just to relax in front of, makes for great convenience. In terms of maintenance, I'll clean the glass in the spring, and we'll have it professionally serviced every other year or so.
__________________
NHskier
NHskier is offline   Reply With Quote
The Following User Says Thank You to NHskier For This Useful Post:
Hillcountry (02-12-2020)
Old 02-12-2020, 08:19 AM   #17
swnoel
Senior Member
 
Join Date: Jan 2007
Posts: 527
Thanks: 83
Thanked 194 Times in 118 Posts
Default

I had a wood furnace(not a wood stove) for years , it still amazes me why anyone would want a pellet stove.
swnoel is offline   Reply With Quote
The Following User Says Thank You to swnoel For This Useful Post:
Hillcountry (02-12-2020)
Old 02-12-2020, 09:09 AM   #18
upthesaukee
Senior Member
 
upthesaukee's Avatar
 
Join Date: Jan 2003
Location: Alton Bay
Posts: 5,543
Blog Entries: 2
Thanks: 2,392
Thanked 1,918 Times in 1,061 Posts
Default Stopped burning wood this year

The first woodstove in our house was Fisher Mama Bear cast iron stove, which served admirably from the mid 80's to the early 2000's. We then switched over to a Hearthstone Mansfield soapstone. Plusses on the change was a more even warmth, no need to polish the enameled cast iron portion, no damper in the stove pipe, and a glass door to enjoy the flames.
Disadvantages required a reducer for the 8 inch triple wall chimney (6 inch stove pipe), not easily cleaned by me (2 brushes needed 6 in & 8 in)(unscrewing slip sleeve in stove pipe and sliding up to vacuum out ash from the top of the stove) (Enter The Chimney Sweep- Dan R), slower to heat the room from a new start after room cooled down, keeping glass clean, replacing door gaskets every year or two.
We burned 5-6 cords of wood annually. Wood was delivered cut and split. I would supplement with fall downs I cut and split. Wood delivered late spring, early summer, stacking in September.
We decided to bite the bullet this year and heat with oil. Cost is very similar. Advantage: house stays far cleaner, no ash residue in LR from emptying the stove, no almost daily vacuuming of the trail of wood dust etc, , and no daily exercise of moving the wood from the wood pile to the mud room. Disadvantage: house is poorly insulated (a ton of sliding glass windows) and we keep the thermostat set at a lower temp. Love my sweatshirts.

Will we go back to burning wood? Probably not full time, but maybe a cord or two., unless oil prices skyrocket.

Dave
__________________
I Live Here... I am always UPTHESAUKEE !!!!
upthesaukee is offline   Reply With Quote
The Following User Says Thank You to upthesaukee For This Useful Post:
Hillcountry (02-12-2020)
Old 02-12-2020, 09:24 PM   #19
Hillcountry
Senior Member
 
Hillcountry's Avatar
 
Join Date: Apr 2016
Location: In the hills
Posts: 2,338
Thanks: 1,566
Thanked 761 Times in 456 Posts
Default

Quote:
Originally Posted by NHskier View Post
We had a wood stove in our first house and loved the heat but it was a lot of work. Years later in our second house we installed a pellet stove fireplace insert since dealing with pellets was much easier and cleaner. The stove ran well for the first two years but after that was nothing but problems. We had several different techs clean it and try to get it running well, without luck. Last year it was running very poorly and I just couldn't keep it going without the burn pot quickly loading up. We'd had it thoroughly cleaned over the previous summer and it was still awful. We barely made it through a half-ton of pellets because I couldn't keep it running to any real extent, and then the feed mechanism failed right about this time last year.

Enough was enough with that stove. I had zero interest in getting it repaired so we started looking at new stoves, particularly Harmon based on reputation. But we also decided to explore propane inserts. We found that having a propane tank installed and lines run by Eastern was very reasonable, and ended up going that route. We absolutely love having the convenience of pushing a button on the remote control to start, adjust flame height and fan settings, and turn off whenever we want. Being able to run it just for an hour to knock the chill out or just to relax in front of, makes for great convenience. In terms of maintenance, I'll clean the glass in the spring, and we'll have it professionally serviced every other year or so.
When you say “insert” is that a burner that fits into a wood stove or a fireplace opening?
Hillcountry is online now   Reply With Quote
Old 02-12-2020, 09:43 PM   #20
NHskier
Senior Member
 
Join Date: Aug 2006
Posts: 284
Thanks: 40
Thanked 33 Times in 30 Posts
Default

Quote:
Originally Posted by Hillcountry View Post
When you say “insert” is that a burner that fits into a wood stove or a fireplace opening?
The new propane unit is an insert in an existing fireplace, as was the pellet stove.
__________________
NHskier
NHskier is offline   Reply With Quote
Old 02-13-2020, 09:52 AM   #21
Hillcountry
Senior Member
 
Hillcountry's Avatar
 
Join Date: Apr 2016
Location: In the hills
Posts: 2,338
Thanks: 1,566
Thanked 761 Times in 456 Posts
Default

Quote:
Originally Posted by NHskier View Post
The new propane unit is an insert in an existing fireplace, as was the pellet stove.
Ok thanks. I am familiar with inserts as I had a coal burning insert many years ago which I liked a lot. Coal was dirty too but I was much younger and dealt with it!
Hillcountry is online now   Reply With Quote
Old 02-15-2020, 07:57 PM   #22
thinkxingu
Senior Member
 
thinkxingu's Avatar
 
Join Date: Jul 2014
Posts: 5,937
Thanks: 1,152
Thanked 1,957 Times in 1,209 Posts
Default

Hill, you should be getting some extended burn times with that Woodstock, right? From what I know about their stoves, a couple loads a day is all it takes.

Sent from my SM-G950U using Winnipesaukee Forum mobile app
thinkxingu is offline   Reply With Quote
Old 02-15-2020, 08:35 PM   #23
Hillcountry
Senior Member
 
Hillcountry's Avatar
 
Join Date: Apr 2016
Location: In the hills
Posts: 2,338
Thanks: 1,566
Thanked 761 Times in 456 Posts
Default

Quote:
Originally Posted by thinkxingu View Post
Hill, you should be getting some extended burn times with that Woodstock, right? From what I know about their stoves, a couple loads a day is all it takes.

Sent from my SM-G950U using Winnipesaukee Forum mobile app
My model is a great stove but the fire box is not huge. When burning good dry wood when I loaded it up before bed around 11pm and when getting up next morning (not having gotten up during the night) the wood would be completely burned. The saving grace was that all you needed to do was take the poker and turn the ashes over and there would be hot glowing coals that easily started the next fire. This was consistent and as long as you loaded it again within say 8 hours you always had those glowing coals. Not sure how others did with this stove but we never got an overly, prolonged burn. Rather than load it to max during the day I would just throw a couple logs on at a time and repeat every few hours.
Hillcountry is online now   Reply With Quote
Old 02-15-2020, 09:48 PM   #24
thinkxingu
Senior Member
 
thinkxingu's Avatar
 
Join Date: Jul 2014
Posts: 5,937
Thanks: 1,152
Thanked 1,957 Times in 1,209 Posts
Default

Quote:
Originally Posted by Hillcountry View Post
My model is a great stove but the fire box is not huge. When burning good dry wood when I loaded it up before bed around 11pm and when getting up next morning (not having gotten up during the night) the wood would be completely burned. The saving grace was that all you needed to do was take the poker and turn the ashes over and there would be hot glowing coals that easily started the next fire. This was consistent and as long as you loaded it again within say 8 hours you always had those glowing coals. Not sure how others did with this stove but we never got an overly, prolonged burn. Rather than load it to max during the day I would just throw a couple logs on at a time and repeat every few hours.
It may be worth looking into how people bank their wood for long burns. I'm not sure of the different Woodstock versions, but I've always seen 10+ hour burns. Though, now that I think about it, that was with the new(er) catalytic combustors...

Sent from my SM-G950U using Winnipesaukee Forum mobile app
thinkxingu is offline   Reply With Quote
Old 02-15-2020, 10:14 PM   #25
upthesaukee
Senior Member
 
upthesaukee's Avatar
 
Join Date: Jan 2003
Location: Alton Bay
Posts: 5,543
Blog Entries: 2
Thanks: 2,392
Thanked 1,918 Times in 1,061 Posts
Default My stove

My stove was rated, i believe, a 14 hr burn. No way. 8 or 9 hours or so was about normal, wood pretty much burned with a bed of embers. Depending on the wood, I would pack the firebox pretty tightly, get a good fire going, and then adjust to stove draft to maintain a 400-500 degree stack temperature. I too would re-stoke the stove around 11pm or so, and it would need to be refilled 6-7am or so.

Dave
__________________
I Live Here... I am always UPTHESAUKEE !!!!
upthesaukee is offline   Reply With Quote
Old 02-15-2020, 10:23 PM   #26
thinkxingu
Senior Member
 
thinkxingu's Avatar
 
Join Date: Jul 2014
Posts: 5,937
Thanks: 1,152
Thanked 1,957 Times in 1,209 Posts
Default

Yeah, not many stoves can do a solid burn all night, but supposedly the new catalytic ones can go a solid 12 hours. My Hearthstone gets ~8 with oak, about ~5 with pine. I almost always burn pine because a. It's free, 2. It's easy to split, c. It's light, and 4. It's also perfect for campfires.

Sent from my SM-G950U using Winnipesaukee Forum mobile app
thinkxingu is offline   Reply With Quote
Old 02-16-2020, 03:41 AM   #27
ApS
Senior Member
 
ApS's Avatar
 
Join Date: Jan 2005
Location: Florida (Sebring & Keys), Wolfeboro
Posts: 5,779
Thanks: 2,074
Thanked 733 Times in 528 Posts
Exclamation Good Stuff...But!

Quote:
Originally Posted by Hillcountry View Post
Ok thanks. I am familiar with inserts as I had a coal burning insert many years ago which I liked a lot. Coal was dirty too but I was much younger and dealt with it!
About 20 years ago, I was able to buy bituminous (soft) coal in Ossipee.

Burned in a woodstove easily converted to coal, I discovered you wouldn't need to burn coal unless you wanted a whole lot of heat!
ApS is offline   Reply With Quote
Old 02-17-2020, 09:42 PM   #28
TheTimeTraveler
Senior Member
 
Join Date: Aug 2015
Posts: 816
Thanks: 256
Thanked 259 Times in 157 Posts
Default

Quote:
Originally Posted by ApS View Post
About 20 years ago, I was able to buy bituminous (soft) coal in Ossipee.

Burned in a woodstove easily converted to coal, I discovered you wouldn't need to burn coal unless you wanted a whole lot of heat!
I used to buy the coal which was coated (to keep down the dust) but it still continued to create a dust issue.

Because it was so dusty and dirty I stopped using it and switched over to wood as a cleaner alternative to coal.
TheTimeTraveler is online now   Reply With Quote
The Following User Says Thank You to TheTimeTraveler For This Useful Post:
ApS (02-17-2020)
Old 02-18-2020, 08:37 AM   #29
ApS
Senior Member
 
ApS's Avatar
 
Join Date: Jan 2005
Location: Florida (Sebring & Keys), Wolfeboro
Posts: 5,779
Thanks: 2,074
Thanked 733 Times in 528 Posts
Red face Good Stuff...But!

We must have burned different types of coal.

'Never had a dust issue, and loaded the stove by hand. No indication of a coating, the coal just looked and felt like shiny black stones.

After burning, the individual lumps of coal got smaller, turned a red-brick color, and eventually disappeared into the ash previously left by wood.

Burning wood was cheaper, and didn't need the ample heat that was offered by bituminous coal. Last I recall, "soft" coal is becoming unavailable.
ApS is offline   Reply With Quote
Old 02-18-2020, 03:09 PM   #30
Hillcountry
Senior Member
 
Hillcountry's Avatar
 
Join Date: Apr 2016
Location: In the hills
Posts: 2,338
Thanks: 1,566
Thanked 761 Times in 456 Posts
Default

Quote:
Originally Posted by ApS View Post
We must have burned different types of coal.

'Never had a dust issue, and loaded the stove by hand. No indication of a coating, the coal just looked and felt like shiny black stones.

After burning, the individual lumps of coal got smaller, turned a red-brick color, and eventually disappeared into the ash previously left by wood.

Burning wood was cheaper, and didn't need the ample heat that was offered by bituminous coal. Last I recall, "soft" coal is becoming unavailable.
Not so much as "dust" but more of a residue from handling...my coal was shiny as well and I built a bin in my garage that handled 2 tons. the guy delivering it would use a dump truck with a chute that the coal traveled through and as it dropped into the bin there was a "cloud" of black that developed over the pile as it filled the hopper. more like a grit than a dust.
Hillcountry is online now   Reply With Quote
Old 02-18-2020, 09:24 PM   #31
TheProfessor
Senior Member
 
Join Date: Nov 2010
Posts: 1,062
Thanks: 17
Thanked 325 Times in 198 Posts
Default

Quote:
Originally Posted by Hillcountry View Post
We have a beautiful, Woodstock Soapstone wood stove (built right here in Lebanon NH)
If is ain't broken . . . why fix it ?

But if money is no issue and you like to try new things . . then go for it.
TheProfessor is offline   Reply With Quote
Old 02-19-2020, 04:13 PM   #32
Hillcountry
Senior Member
 
Hillcountry's Avatar
 
Join Date: Apr 2016
Location: In the hills
Posts: 2,338
Thanks: 1,566
Thanked 761 Times in 456 Posts
Default

Quote:
Originally Posted by TheProfessor View Post
If is ain't broken . . . why fix it ?

But if money is no issue and you like to try new things . . then go for it.
Burning wood is getting old, as I am...just looking for something "easier" to deal with. I never said my wood stove was "broken"
Hillcountry is online now   Reply With Quote
The Following 2 Users Say Thank You to Hillcountry For This Useful Post:
ishoot308 (02-19-2020), upthesaukee (02-19-2020)
Old 02-19-2020, 07:47 PM   #33
map
Senior Member
 
Join Date: Jul 2019
Location: The Weirs
Posts: 200
Thanks: 159
Thanked 63 Times in 47 Posts
Default

We just sold our house back in NY that had a fireplace and a wood stove and we loved burning wood. We loved the crackling of the wood in the fireplace and watching the flames and also the same with the wood stove (a Vermont Castings catalytic). Nothing like the warmth of wood.

Pellet stoves- not so much. Never appealed to us.

But yes- stacking and carrying wood- good exercise but gets harder and harder.

Now we are living in a cottage in The Weirs with propane heat but unfortunately no room for a gas heat stove or fireplace. We have plans to buy an electric stove heater- yeah- I know. But at least it will be something. They make some realistic looking ones- well- kind of...

We really miss having a wood stove.
map is offline   Reply With Quote
The Following User Says Thank You to map For This Useful Post:
ApS (02-09-2021)
Old 02-21-2020, 04:13 PM   #34
Taz
Senior Member
 
Join Date: Apr 2005
Posts: 345
Thanks: 3
Thanked 68 Times in 46 Posts
Default wood vs. pellet

Quote:
Originally Posted by Hillcountry View Post
We have a beautiful, Woodstock Soapstone wood stove (built right here in Lebanon NH) and as we age are using wood less and less (expense,
work to move, stack etc.)
That said, is it worth selling the soapstone stove and installing a pellet stove?
I know you still have to buy and carry/move bags of pellets, which I have no problem with as I am capable of heavy work.
Surely, someone has weighed both and made decisions on this...
Is it worth it? to change to pellet stove. Yes, in my opinion it is. Used wood stove for years at ski house, loved it once it was up and running but getting up on Friday night and sometimes it would not light and get going and if it did it could be 2 hours before getting any heat out of it, most times it would not stay going during the night, stacking wood sucks, hard to find a good place to store wood, I could go on.

Pellet stove, lights every time in 5 minutes or less, start feeling heat immediately, takes half hour to 40 minutes for the ski house to be up to or close to temp, can control heat sooo much better than a wood stove, much more steady temp than wood stove, goes all night long without getting up, 40 lbs bags easy to stack, store, can store inside, less mess. I could go on, pellet stove sooo much better in my opinion. I agree, the wood gets old.

The 2 drawbacks I will point out, if its in the TV area, its louder than wood stove so if that's an issue look for ones that are quieter than others, they are out there, second, cleaning it is more involved. However, creosote does not build up in the chimney like a wood stove so cleaning chimney needed much less.

Having said all that the pellet stove is much better and easier in my opinion and the drawbacks do not change my opinion and do not regret the change.
Taz is offline   Reply With Quote
The Following 2 Users Say Thank You to Taz For This Useful Post:
gillygirl (02-21-2020), Hillcountry (02-23-2020)
Old 02-21-2020, 04:22 PM   #35
Taz
Senior Member
 
Join Date: Apr 2005
Posts: 345
Thanks: 3
Thanked 68 Times in 46 Posts
Default pellet stove

Quote:
Originally Posted by swnoel View Post
I had a wood furnace(not a wood stove) for years , it still amazes me why anyone would want a pellet stove.
There are many reasons. I had both. Read my post above.
Taz is offline   Reply With Quote
The Following User Says Thank You to Taz For This Useful Post:
Hillcountry (02-23-2020)
Old 02-08-2021, 09:25 PM   #36
bigdog
Senior Member
 
bigdog's Avatar
 
Join Date: Apr 2006
Location: Central MA-Gilford
Posts: 1,407
Thanks: 304
Thanked 117 Times in 94 Posts
Default Changing over from Pellet to Wood stove

I am contemplating changing over from Pellet to Wood stove, but have a serious issue, stove pipe extending above roof.

The current setup of the pellet stove, is positioned in the corner of my living-room. Stove pipe comes out the back of stove 6", then extends vertically up about 6ft, then goes horizontally thru inside wall to outside of house.
Works perfect for a pellet stove.

To change over to a wood-stove, I'd have to change-over to a 8" stove-pipe, and also cover my inside corner walls with 'Hardi-Board or Durock' cement board, as I would not have the factory stove clearances, from combustable walls.

The main issue I have is where the stove pipe goes through the side of house.
That side of house is about 20 ft high, maybe more, before I could get pipe to extend above roof-line. I actually have 2 roof-line, and a picture will explain. The first 8 ft pipe on side could be anchored down to the side of house, but then there would be another 10 ft that would extend, above first section of roof, to get above second section of roof.

See house pic. attached. In the picture you can see where current pellet stove pipe come through side of house of left, beside porch.
Interested in your opinions, if stove pipe installation is possible ?

Name:  House pic.jpg
Views: 1395
Size:  135.6 KB

Last edited by bigdog; 02-08-2021 at 09:33 PM. Reason: photo upload
bigdog is offline   Reply With Quote
Old 02-08-2021, 09:35 PM   #37
WinnisquamZ
Senior Member
 
WinnisquamZ's Avatar
 
Join Date: Dec 2016
Posts: 1,859
Thanks: 191
Thanked 587 Times in 393 Posts
Default

Difficult situation for a wood stove install due to the roof line and code requires for the pipe install. Never mind the cost of the pipe!Had a similar issue and went with propane direct vent


Sent from my iPhone using Winnipesaukee Forum mobile app
WinnisquamZ is offline   Reply With Quote
Old 02-08-2021, 10:00 PM   #38
8gv
Senior Member
 
8gv's Avatar
 
Join Date: Jan 2012
Posts: 2,000
Thanks: 61
Thanked 697 Times in 453 Posts
Default

Heating with wood is a lot of work.

Keep the pellet stove and go fishing instead.
8gv is offline   Reply With Quote
The Following 3 Users Say Thank You to 8gv For This Useful Post:
ApS (02-08-2021), Slickcraft (02-09-2021), TheTimeTraveler (02-08-2021)
Old 02-08-2021, 10:42 PM   #39
ApS
Senior Member
 
ApS's Avatar
 
Join Date: Jan 2005
Location: Florida (Sebring & Keys), Wolfeboro
Posts: 5,779
Thanks: 2,074
Thanked 733 Times in 528 Posts
Unhappy Canadian "Code" Is Even More Strict!

Heating with wood is a lot of work, but I get a kick out of cutting windfalls from my "wood-lot". It's no worries about losing electricity and free heat!

A NH friend who is about 60, cuts wood from his deep lot, drags it downhill behind his truck, then cuts and splits it. All to feed his TWO wood stoves all winter.

A wood stove doesn't like a chimney with a lot of zigs and zags, as it is heavily reliant on a natural draft. (It could get smoky indoors). Also, an external pipe with that exposure is subject to damage from wind-driven debris.

Can you "engineer" a different location, and make room for both stoves?
ApS is offline   Reply With Quote
Old 02-09-2021, 11:52 AM   #40
bigdog
Senior Member
 
bigdog's Avatar
 
Join Date: Apr 2006
Location: Central MA-Gilford
Posts: 1,407
Thanks: 304
Thanked 117 Times in 94 Posts
Default

Quote:
Originally Posted by WinnisquamZ View Post
Difficult situation for a wood stove install due to the roof line and code requires for the pipe install. Never mind the cost of the pipe!Had a similar issue and went with propane direct vent

Sent from my iPhone using Winnipesaukee Forum mobile app
Responding to WinnisquamZ......"went with propane direct vent"....

Your recommendation is a great alternative, and a propane stove would eliminate, all the moving parts and electronics of a pellet stove, however, the cost of propane is getting extremely costly, and expected to rise, with new Govt. regulations soon to be being implemented by the Feds. !

A propane stove would also eliminate the issue without power failures, as this type stove does not need electricity to operate, except for any fans to move warm air. That particular issue could be controlled by connecting the stoves electrical connection to a small external generator.

Your thoughts appreciated, as well as rest of Forum members, who may have a 'propane' stove.

Thanks again to all !

Last edited by bigdog; 02-09-2021 at 11:53 AM. Reason: spelling
bigdog is offline   Reply With Quote
Old 02-09-2021, 12:26 PM   #41
thinkxingu
Senior Member
 
thinkxingu's Avatar
 
Join Date: Jul 2014
Posts: 5,937
Thanks: 1,152
Thanked 1,957 Times in 1,209 Posts
Default

I wouldn't even consider a change unless you could get free wood.

Sent from my SM-G950U using Winnipesaukee Forum mobile app
thinkxingu is offline   Reply With Quote
Old 02-09-2021, 02:29 PM   #42
WinnisquamZ
Senior Member
 
WinnisquamZ's Avatar
 
Join Date: Dec 2016
Posts: 1,859
Thanks: 191
Thanked 587 Times in 393 Posts
Default

Quote:
Originally Posted by bigdog View Post
Responding to WinnisquamZ......"went with propane direct vent"....

Your recommendation is a great alternative, and a propane stove would eliminate, all the moving parts and electronics of a pellet stove, however, the cost of propane is getting extremely costly, and expected to rise, with new Govt. regulations soon to be being implemented by the Feds. !

A propane stove would also eliminate the issue without power failures, as this type stove does not need electricity to operate, except for any fans to move warm air. That particular issue could be controlled by connecting the stoves electrical connection to a small external generator.

Your thoughts appreciated, as well as rest of Forum members, who may have a 'propane' stove.

Thanks again to all !
We choose a cast iron stove with fan and battery backup for just that reason. It’s not our first source of heat so gas cost is minimal. Would do it again.

Sent from my iPhone using Winnipesaukee Forum mobile app
WinnisquamZ is offline   Reply With Quote
Old 02-09-2021, 03:30 PM   #43
Blue Thunder
Senior Member
 
Blue Thunder's Avatar
 
Join Date: Apr 2004
Location: Eastern MA & Frye Island/Sebago Lake, Maine
Posts: 934
Thanks: 247
Thanked 323 Times in 148 Posts
Default

Unless your firewood is free, you need to consider the cost of the wood. Seasoned firewood is hard to come by and can cost $350-$400 per cord. Pellet heat is cheaper than propane or wood and a lot less work. IMHO adding an 8" chimney in that location will not be very aesthetically pleasing to look at. Stick with the pellet stove if you can.
__________________
" Live for today because yesterday is gone and tomorrow may never come"
Blue Thunder is offline   Reply With Quote
The Following User Says Thank You to Blue Thunder For This Useful Post:
bigdog (02-10-2021)
Old 02-09-2021, 04:06 PM   #44
Biggd
Senior Member
 
Join Date: Nov 2016
Location: Waltham Ma./Meredith NH
Posts: 3,729
Thanks: 1,941
Thanked 1,065 Times in 672 Posts
Default

Quote:
Originally Posted by Blue Thunder View Post
Unless your firewood is free, you need to consider the cost of the wood. Seasoned firewood is hard to come by and can cost $350-$400 per cord. Pellet heat is cheaper than propane or wood and a lot less work. IMHO adding an 8" chimney in that location will not be very aesthetically pleasing to look at. Stick with the pellet stove if you can.
I buy my wood in the spring at $250 a cord. If you wait until fall and winter you will pay more and it will be harder to find.

Sent from my SM-G950U using Winnipesaukee Forum mobile app
Biggd is offline   Reply With Quote
The Following User Says Thank You to Biggd For This Useful Post:
ApS (02-09-2021)
Old 02-09-2021, 06:12 PM   #45
Blue Thunder
Senior Member
 
Blue Thunder's Avatar
 
Join Date: Apr 2004
Location: Eastern MA & Frye Island/Sebago Lake, Maine
Posts: 934
Thanks: 247
Thanked 323 Times in 148 Posts
Default

Quote:
Originally Posted by Biggd View Post
I buy my wood in the spring at $250 a cord. If you wait until fall and winter you will pay more and it will be harder to find.

Sent from my SM-G950U using Winnipesaukee Forum mobile app
Are you buying seasoned firewood? 6 months isn’t long enough to dry it properly for use. Either way that’s a good price for a cord. Much more expensive here in Eastern Mass and availability is a problem. Believe it or not the pandemic has contributed to that. Most dealers sold out early
__________________
" Live for today because yesterday is gone and tomorrow may never come"
Blue Thunder is offline   Reply With Quote
Old 02-10-2021, 11:03 AM   #46
bigdog
Senior Member
 
bigdog's Avatar
 
Join Date: Apr 2006
Location: Central MA-Gilford
Posts: 1,407
Thanks: 304
Thanked 117 Times in 94 Posts
Default Sent you a PM, please read.

Quote:
Originally Posted by WinnisquamZ View Post
We choose a cast iron stove with fan and battery backup for just that reason. It’s not our first source of heat so gas cost is minimal. Would do it again.

Sent from my iPhone using Winnipesaukee Forum mobile app
WinnisquamZ,
I sent you a PM, please read.

THanks,
Bigdog
bigdog is offline   Reply With Quote
Old 02-10-2021, 01:06 PM   #47
Flylady
Senior Member
 
Join Date: Apr 2006
Location: So. California & Lakes Region
Posts: 256
Thanks: 225
Thanked 106 Times in 61 Posts
Default Propane Stove

I have a propane stove that provides my heat. I also use propane for cooking and my dryer. The cost of propane varies based on the contract you have with supplier. I do know that higher usage drops the rate. No worries if electric goes out and best of all no clean up. I do have the unit services every other year to ensure highest efficiency.
Flylady is offline   Reply With Quote
Old 02-10-2021, 01:26 PM   #48
Biggd
Senior Member
 
Join Date: Nov 2016
Location: Waltham Ma./Meredith NH
Posts: 3,729
Thanks: 1,941
Thanked 1,065 Times in 672 Posts
Default

Quote:
Originally Posted by Blue Thunder View Post
Are you buying seasoned firewood? 6 months isn’t long enough to dry it properly for use. Either way that’s a good price for a cord. Much more expensive here in Eastern Mass and availability is a problem. Believe it or not the pandemic has contributed to that. Most dealers sold out early
Seasoned wood. Yes, Ma is much more money.
Biggd is offline   Reply With Quote
Old 02-10-2021, 04:06 PM   #49
MeredithMan
Senior Member
 
MeredithMan's Avatar
 
Join Date: Aug 2013
Location: Bedford, NH; Meredith, NH
Posts: 861
Thanks: 233
Thanked 768 Times in 302 Posts
Default 2 Pellet Stoves for sale...

...I actually have two pellet stoves that I would like to sell. One is an insert for a fireplace and one is a free-standing unit. They were both in the house here in Bedford that we bought last year. They are both Enviro Empress brand, which is allegedly very good. If anyone has any interest, let me know. Thanks.
MeredithMan is offline   Reply With Quote
Old 02-10-2021, 05:30 PM   #50
bigdog
Senior Member
 
bigdog's Avatar
 
Join Date: Apr 2006
Location: Central MA-Gilford
Posts: 1,407
Thanks: 304
Thanked 117 Times in 94 Posts
Default

Quote:
Originally Posted by MeredithMan View Post
...I actually have two pellet stoves that I would like to sell. One is an insert for a fireplace and one is a free-standing unit. They were both in the house here in Bedford that we bought last year. They are both Enviro Empress brand, which is allegedly very good. If anyone has any interest, let me know. Thanks.
MeredithMan,

Please send me a PM on how much you want for the free-standing
Enviro Empress.

Thanks,
Bigdog
bigdog is offline   Reply With Quote
Old 02-10-2021, 06:36 PM   #51
WinnisquamZ
Senior Member
 
WinnisquamZ's Avatar
 
Join Date: Dec 2016
Posts: 1,859
Thanks: 191
Thanked 587 Times in 393 Posts
Default

Quote:
Originally Posted by bigdog View Post
MeredithMan,

Please send me a PM on how much you want for the free-standing

Enviro Empress.

Thanks,

Bigdog
Name:  Image1613000203.964620.jpg
Views: 1139
Size:  25.7 KB

Sent from my iPhone using Winnipesaukee Forum mobile app
WinnisquamZ is offline   Reply With Quote
Old 02-10-2021, 06:52 PM   #52
WinnisquamZ
Senior Member
 
WinnisquamZ's Avatar
 
Join Date: Dec 2016
Posts: 1,859
Thanks: 191
Thanked 587 Times in 393 Posts
Default

Quote:
Originally Posted by bigdog View Post
MeredithMan,

Please send me a PM on how much you want for the free-standing

Enviro Empress.

Thanks,

Bigdog
Name:  IMG_3134.jpg
Views: 1054
Size:  59.6 KB

Sent from my iPhone using Winnipesaukee Forum mobile app
WinnisquamZ is offline   Reply With Quote
Old 02-10-2021, 08:05 PM   #53
SAB1
Senior Member
 
Join Date: Feb 2012
Location: Tuftonboro
Posts: 1,162
Thanks: 182
Thanked 297 Times in 220 Posts
Default

Agree with those above, switching from pellet to wood makes little if any sense. Too costly for stove & pipe, lot more work and more mess. Pellet stove will burn all day if you fill it in the morning and leave.
SAB1 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 10:34 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

This page was generated in 0.24486 seconds