Go Back   Winnipesaukee Forum > Winnipesaukee Forums > Automotive
Home Forums Gallery Webcams Blogs YouTube Channel Classifieds Calendar Register FAQDonate Members List Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 05-13-2022, 03:07 PM   #1
SailinAway
Senior Member
 
Join Date: Apr 2019
Posts: 991
Thanks: 256
Thanked 280 Times in 169 Posts
Default Hard to get key in and out of ignition

This happened suddenly today. I have to wiggle the key quite a bit to get it in and out of the ignition and use a little bit more pressure than usual. This happens with my regular key and the spare. The keys work in the door lock. Hence the problem is in the ignition cylinder, correct? Car runs fine.

Dealer: "Lubricate the cylinder or use compressed air to clean it out."
My mechanic: "Don't lubricate the cylinder or use compressed air. That could make it worse by gunking up the cylinder or forcing debris farther into it."

I find that same disagreement online. In any case, it seems like I should just get the cylinder replaced. Do you agree?
SailinAway is offline   Reply With Quote
Old 05-13-2022, 03:43 PM   #2
Charlie T
Senior Member
 
Join Date: Apr 2004
Posts: 302
Thanks: 248
Thanked 178 Times in 84 Posts
Default Lock Ease

Get some Lock Ease spray. It's essentially liquid Graphite and made especially for locks. I believe you will find most locksmiths swear by it. If it doesn't work, change the lock. No harm done other than spending $5.00 on the lock ease
Charlie T is offline   Reply With Quote
The Following User Says Thank You to Charlie T For This Useful Post:
SailinAway (05-13-2022)
Old 05-13-2022, 03:52 PM   #3
SailinAway
Senior Member
 
Join Date: Apr 2019
Posts: 991
Thanks: 256
Thanked 280 Times in 169 Posts
Default

Quote:
Originally Posted by Charlie T View Post
Get some Lock Ease spray. It's essentially liquid Graphite and made especially for locks. I believe you will find most locksmiths swear by it. If it doesn't work, change the lock. No harm done other than spending $5.00 on the lock ease
I believe I have some graphite. Are you sure it won't cause any damage?
SailinAway is offline   Reply With Quote
Old 05-13-2022, 03:59 PM   #4
SailinAway
Senior Member
 
Join Date: Apr 2019
Posts: 991
Thanks: 256
Thanked 280 Times in 169 Posts
Default

I ordered the replacement cylinder from the dealer. The dealer will code it and I will have it installed by my mechanic (cheaper than the dealer). Any problem with that plan? In other words, the cylinder can be coded before installing it?
SailinAway is offline   Reply With Quote
Old 05-13-2022, 04:00 PM   #5
Charlie T
Senior Member
 
Join Date: Apr 2004
Posts: 302
Thanks: 248
Thanked 178 Times in 84 Posts
Default Specific for locks

The Lock Ease is specifically for locks. A quick spray should be all you need. It should not cause any damage unless you spray far too much in the lock. Follow the directions and you should be fine. Again, what do you have to lose, It's already broken.
Charlie T is offline   Reply With Quote
The Following User Says Thank You to Charlie T For This Useful Post:
SailinAway (05-13-2022)
Sponsored Links
Old 05-13-2022, 04:06 PM   #6
SailinAway
Senior Member
 
Join Date: Apr 2019
Posts: 991
Thanks: 256
Thanked 280 Times in 169 Posts
Default

Quote:
Originally Posted by Charlie T View Post
The Lock Ease is specifically for locks. A quick spray should be all you need. It should not cause any damage unless you spray far too much in the lock. Follow the directions and you should be fine. Again, what do you have to lose, It's already broken.
Actually it's not broken. It's just difficult, and I don't want to break it.
SailinAway is offline   Reply With Quote
Old 05-13-2022, 04:49 PM   #7
DickR
Senior Member
 
Join Date: Apr 2008
Location: Moultonborough
Posts: 734
Thanks: 4
Thanked 254 Times in 166 Posts
Default

I was having the same sort of difficulty with my 2015 Subaru. Then last year I got a notice from the mfg telling me I could get the problem fixed at no cost. I did, and it's been fine since. Maybe your vehicle also has a recall going on that.
DickR is offline   Reply With Quote
Old 05-13-2022, 05:07 PM   #8
Descant
Senior Member
 
Join Date: Mar 2006
Location: Merrimack and Welch Island
Posts: 4,003
Thanks: 1,203
Thanked 1,498 Times in 975 Posts
Default

This is NH. Why not just leave the key in the ignition? Apparently you can still lock the door if you like. (I bet FLL doesn't lock his car.) Uh Oh. My wife leaves the fob in the car, so the car can't be locked, but you can start it, I guess, if you're not afraid of a big protective dog. BTW windows are open.
My friend in Boston used to lock the car when it was parked on the street. Several break ins. When she stopped locking it, no more problems.
Descant is offline   Reply With Quote
Old 05-13-2022, 07:24 PM   #9
TheTimeTraveler
Senior Member
 
Join Date: Aug 2015
Posts: 816
Thanks: 256
Thanked 259 Times in 157 Posts
Default

Don't spray the graphite into the lock itself.

You should spray the edges of your key and then insert and turn the key multiple times to work it into the lock.

Hopefully problem solved........
TheTimeTraveler is offline   Reply With Quote
Old 05-13-2022, 08:00 PM   #10
SailinAway
Senior Member
 
Join Date: Apr 2019
Posts: 991
Thanks: 256
Thanked 280 Times in 169 Posts
Default

Quote:
Originally Posted by TheTimeTraveler View Post
Don't spray the graphite into the lock itself.

You should spray the edges of your key and then insert and turn the key multiple times to work it into the lock.

Hopefully problem solved........
Aha, so we have some disagreement about whether it's OK to put graphite in the lock cylinder. My mechanic did spray lubricant on the key and it didn't help.
SailinAway is offline   Reply With Quote
Old 05-20-2022, 07:49 PM   #11
SailinAway
Senior Member
 
Join Date: Apr 2019
Posts: 991
Thanks: 256
Thanked 280 Times in 169 Posts
Default Update

Got the cylinder changed. Now the key goes in and out fine, but it doesn't turn easily. I bought the part at the dealer and had the dealer code it. He said he greased it. Did he not grease it enough?
SailinAway is offline   Reply With Quote
Old 05-20-2022, 10:36 PM   #12
John Mercier
Senior Member
 
Join Date: Jun 2021
Posts: 2,904
Thanks: 2
Thanked 523 Times in 431 Posts
Default

Did they give you a new key with the change in cylinder?

I wonder if the key wore with all that jiggling?
John Mercier is offline   Reply With Quote
Old 05-21-2022, 06:28 AM   #13
fatlazyless
Senior Member
 
fatlazyless's Avatar
 
Join Date: Apr 2004
Posts: 8,506
Blog Entries: 1
Thanks: 291
Thanked 950 Times in 692 Posts
Default

If the key lock is on the side of the steering column, it interlocks with the steering, and the steering wheel cannot be turned until it is unlocked. Sometimes, pulling the steering wheel down to the left will make it easier for the key to slide into the key cylinder.

So, what is the year, make, model, and mileage ...... and has it been detailed with a super-expensive ceramic coating ...... ha-ha-ha! ....
__________________
... down and out, liv'n that Walmart side of the lake!
fatlazyless is offline   Reply With Quote
Old 05-21-2022, 07:21 AM   #14
8gv
Senior Member
 
8gv's Avatar
 
Join Date: Jan 2012
Posts: 2,002
Thanks: 61
Thanked 700 Times in 455 Posts
Default

A possible explanation...

When the car is running the power steering pump provides pressure to keep the front wheels pointed where you want them.

When you turn the car off the wheels may have been loaded to the left or right.

Without the power steering to resist that force, the wheels unload and settle back to where they they have no force on them.

This puts a twist on the steering wheel which puts pressure on the steering lock.

The key will be hard to remove in this case.

To test this theory, try turning the wheel when the key is giving you trouble.

You will feel resistance as if you are turning it against a strong spring.

If turning the wheel makes the key issue go away then you now know what the problem is.

To prevent it in the future always turn the wheels straight and let go of the steering wheel before shutting the car off.

This may not your problem but it may help others here.

Good luck!
8gv is offline   Reply With Quote
Old 05-21-2022, 07:25 AM   #15
8gv
Senior Member
 
8gv's Avatar
 
Join Date: Jan 2012
Posts: 2,002
Thanks: 61
Thanked 700 Times in 455 Posts
Default

What is the year make and model of the car?
8gv is offline   Reply With Quote
Old 05-22-2022, 08:55 PM   #16
SailinAway
Senior Member
 
Join Date: Apr 2019
Posts: 991
Thanks: 256
Thanked 280 Times in 169 Posts
Default

The key now goes in and out of the lock easily. There is some, I would say, friction when I turn the key to start and stop the engine. Friction that wasn't there with the previous lock. It feels like the friction is between the lock cylinder and the housing around it (?).

The key was not replaced. The new lock was coded to the old key. 2014 Chevy Sonic.
SailinAway is offline   Reply With Quote
Old 05-23-2022, 06:18 AM   #17
fatlazyless
Senior Member
 
fatlazyless's Avatar
 
Join Date: Apr 2004
Posts: 8,506
Blog Entries: 1
Thanks: 291
Thanked 950 Times in 692 Posts
Default

Go get the Sonic detailed with a two thousand dollar ceramic coating, and this key cylinder will automatically work totally totally perfect! ....
__________________
... down and out, liv'n that Walmart side of the lake!
fatlazyless is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:56 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

This page was generated in 0.31259 seconds