Cannot find a motor for my boat!

JasonG · 03-10-2017, 12:35 PM

I am currently restoring a 1971 Glastron GT-150 boat. I am hoping to have it done in the next 2 months. I need to find a 75-90 HP outboard for it, but I am actually having trouble finding a pre owned one.

I am looking for a Mercury specifically and I contacted every dealer in NH. I either got no response or not available. Prefer early 90's or newer with controls and paying up to $3000. Craigslist/LetGo/Facebook Marketplace seem like slim pickings too.

Any sellers? Any thoughts?

Thanks!
Jason
Londonderry, NH
727-488-8575

dt5150 · 03-10-2017, 03:44 PM

https://boston.craigslist.org/nos/bpo/6031907690.html
https://nh.craigslist.org/bpd/5964229121.html

sluggo · 03-10-2017, 04:49 PM

I took this off the same boat a couple of years ago and just put it in storage. It ran great before I put it away 120 Johnson vro.... make me an offer... not sure where the controls are but I am sure I have them

Diver1111 · 03-10-2017, 07:44 PM

This man Joel contacted me recently about some of the outboards I find now and then. He's in Manchester.

I would suggest you contact him because he was not interested for the most part in the newer stuff but instead the older stuff-what you seem to be interested in:

www.runneroutboards.com

8gv · 03-11-2017, 07:46 AM

How about...

https://nh.craigslist.org/bpo/6038165997.html

Top-Water · 03-11-2017, 08:03 AM

Quote:

Originally Posted by dt5150

https://nh.craigslist.org/bpd/5964229121.html

You might want to stay away from this one and any of his other offerings on craigslist or at the very least do some "very very" detailed research on who you are dealing with. If you need a part fine. If you need service or anything that needs to be paid for in advance be careful.

https://www.winnipesaukee.com/forums...ad.php?t=19087

ishoot308 · 03-11-2017, 08:35 AM

Quote:

Originally Posted by JasonG

I am currently restoring a 1971 Glastron GT-150 boat. I am hoping to have it done in the next 2 months. I need to find a 75-90 HP outboard for it, but I am actually having trouble finding a pre owned one.

I am looking for a Mercury specifically and I contacted every dealer in NH. I either got no response or not available. Prefer early 90's or newer with controls and paying up to $3000. Craigslist/LetGo/Facebook Marketplace seem like slim pickings too.

Any sellers? Any thoughts?

Thanks!
Jason
Londonderry, NH
727-488-8575

Jason,

Did you try Dave's Motorboat Shoppe in Gilford? He usually has a number of used outboards for sale. If he doesn't have he could certainly point you in the right direction.

Good luck with your cool project and be sure to post final pics!

Dan

JasonG · 03-11-2017, 09:01 AM

Quote:

Originally Posted by Diver1111

This man Joel contacted me recently about some of the outboards I find now and then. He's in Manchester.

I would suggest you contact him because he was not interested for the most part in the newer stuff but instead the older stuff-what you seem to be interested in:

www.runneroutboards.com

Spoke to him, no luck

ursa minor · 03-11-2017, 10:15 AM

If craigslist doesn't work out on the motor search, "Outboard Exchange" in Connecticut used to rebuild certain 2 strokes in the size range you're looking for. Also, M&M Salvage in Meredith might be a source for controls and cables for an older engine if you find one that doesn't have those accessories. Another possible engine to consider in that size range would be the 2 stroke Yamaha 90, they were a popular engine for smaller boats. I believe that the 3 cylinder Mercury 75-90 HP engines from the late 80's to early 2000's are actually a Yamaha power head. Good luck, saw you're making progress on the boat in the other thread.

JasonG · 03-11-2017, 11:44 AM

Quote:

Originally Posted by ishoot308

Jason,

Did you try Dave's Motorboat Shoppe in Gilford? He usually has a number of used outboards for sale. If he doesn't have he could certainly point you in the right direction.

Good luck with your cool project and be sure to post final pics!

Dan

I did. Have not heard back.

ursa minor · 03-11-2017, 01:14 PM

Jason, this one might be worth a call. Looks like a late 80's 75 HP, sort of a mini tower of power (4 cylinder vs. 6) They were good runners in the day, looks like it has controls too.

https://boston.craigslist.org/sob/boa/6023105351.html

tummyman · 03-11-2017, 05:42 PM

Did you try M&M Salvage in Meredith across from their transfer satation......they have almost anything used, some very used. Might be worth a peek.....

ishoot308 · 03-11-2017, 05:51 PM

Quote:

Originally Posted by JasonG

I did. Have not heard back.

When your in the area it would be worth going in person to Fays and speak personally to Jeff. Calling the marina is one thing but going in person makes a difference!

Dan

fatlazyless · 03-12-2017, 07:53 AM

Located at the intersection of Route 175 and Route 25/3 in Holderness, across the road from Little Squam Lake, https://www.facebook.com/NHmobilemarine/ seems like a good place to go looking for a 10-20 year old Mercury two stroke outboard.

Just up the road, also on Little Squam, there's Squam Lake Boat Livery, for used Evinrude and Johnson, https://www.facebook.com/squamboatlivery/, and River Edge Marina, www.riveredgemarina.com, for used Mercury and Honda.

Woodsy · 03-13-2017, 03:10 PM

Online.... Check out Scream & Fly & Offshore Only

http://www.screamandfly.com/

http://www.offshoreonly.com/

Powerboat Swap shop on Facebook...

and you might want to check with John Spooner @ Diamond Shine. He is running around in an old Viper.... might have a line on a motor for you.

Woodsy

DesertDweller · 03-13-2017, 04:41 PM

I think calling local outboard dealers is a good way to go. People are re-powering all the time and if you let them know they can keep an eye out for what you are looking for. EBay is another source but likely not local (lots of Florida dealers). I realize you said Mercury, but you might want to consider the old Yamaha 90 (two strokes). Three cylinder, light weight, run great, and near bullet proof. Don't think they changed the engine design for the last twenty years they were available. Used to be a real popular choice for Boston Whaler Montauk re-powers back in the day until they stopped making them.

JasonG · 03-16-2017, 08:38 AM

Quote:

Originally Posted by tummyman

Did you try M&M Salvage in Meredith across from their transfer satation......they have almost anything used, some very used. Might be worth a peek.....

i did, no luck

ursa minor · 03-19-2017, 02:55 PM

Hey Jason, here's an inline 6 90 HP with controls . Looks to be from about 1978 if I'm remembering my vintage Mercury decals by year.

https://boston.craigslist.org/sob/boa/6047632587.html

Dad sold the C * C · 03-19-2017, 05:33 PM

Quote:

Originally Posted by Diver1111

This man Joel contacted me recently about some of the outboards I find now and then. He's in Manchester.

I would suggest you contact him because he was not interested for the most part in the newer stuff but instead the older stuff-what you seem to be interested in:

www.runneroutboards.com

I did go visit Joel today, I was looking for a 60's 18 HP OEM. He had quite a few to choose from including some Evinrude Fastwins. He seems to run a professional business, with his primary clientele being fishermen looking for light weight 2 stokes and not full-on cosmetic restoration.

His prices seem reasonable and flexible with accessories such as electric start. I will let you know how I make out as I found a motor that will work with the old controls that came with my "project boat".

JasonG · 03-27-2017, 05:00 PM

Found one! Thanks for the responses

ursa minor · 03-27-2017, 06:17 PM

That's good news, what did you end up with?

Please keep us posted on progress with the boat rebuild work as well.

03-10-2017, 12:35 PM	#1
JasonG Senior Member Join Date: May 2006 Posts: 310 Thanks: 48 Thanked 45 Times in 33 Posts	Cannot find a motor for my boat! I am currently restoring a 1971 Glastron GT-150 boat. I am hoping to have it done in the next 2 months. I need to find a 75-90 HP outboard for it, but I am actually having trouble finding a pre owned one. I am looking for a Mercury specifically and I contacted every dealer in NH. I either got no response or not available. Prefer early 90's or newer with controls and paying up to $3000. Craigslist/LetGo/Facebook Marketplace seem like slim pickings too. Any sellers? Any thoughts? Thanks! Jason Londonderry, NH 727-488-8575

03-10-2017, 04:49 PM	#3
sluggo Senior Member Join Date: Nov 2010 Posts: 168 Thanks: 13 Thanked 70 Times in 43 Posts	I took this off the same boat a couple of years ago and just put it in storage. It ran great before I put it away 120 Johnson vro.... make me an offer... not sure where the controls are but I am sure I have them Attached Images

03-11-2017, 10:15 AM	#9
ursa minor Senior Member Join Date: Aug 2010 Location: Tuftonborough & Franklin MA Posts: 265 Thanks: 99 Thanked 143 Times in 64 Posts	If craigslist doesn't work out on the motor search, "Outboard Exchange" in Connecticut used to rebuild certain 2 strokes in the size range you're looking for. Also, M&M Salvage in Meredith might be a source for controls and cables for an older engine if you find one that doesn't have those accessories. Another possible engine to consider in that size range would be the 2 stroke Yamaha 90, they were a popular engine for smaller boats. I believe that the 3 cylinder Mercury 75-90 HP engines from the late 80's to early 2000's are actually a Yamaha power head. Good luck, saw you're making progress on the boat in the other thread. __________________ " Any day with a boat ride in it is a good day"

03-11-2017, 01:14 PM	#11
ursa minor Senior Member Join Date: Aug 2010 Location: Tuftonborough & Franklin MA Posts: 265 Thanks: 99 Thanked 143 Times in 64 Posts	Jason, this one might be worth a call. Looks like a late 80's 75 HP, sort of a mini tower of power (4 cylinder vs. 6) They were good runners in the day, looks like it has controls too. https://boston.craigslist.org/sob/boa/6023105351.html __________________ " Any day with a boat ride in it is a good day"

03-12-2017, 07:53 AM	#14
fatlazyless Senior Member Join Date: Apr 2004 Posts: 8,525 Blog Entries: 1 Thanks: 295 Thanked 957 Times in 698 Posts	Located at the intersection of Route 175 and Route 25/3 in Holderness, across the road from Little Squam Lake, https://www.facebook.com/NHmobilemarine/ seems like a good place to go looking for a 10-20 year old Mercury two stroke outboard. Just up the road, also on Little Squam, there's Squam Lake Boat Livery, for used Evinrude and Johnson, https://www.facebook.com/squamboatlivery/, and River Edge Marina, www.riveredgemarina.com, for used Mercury and Honda. __________________ ... down and out, liv'n that Walmart side of the lake! Last edited by fatlazyless; 03-12-2017 at 09:06 AM.

03-10-2017, 03:44 PM	#2
dt5150 Senior Member Join Date: Sep 2011 Posts: 396 Thanks: 4 Thanked 105 Times in 70 Posts	https://boston.craigslist.org/nos/bpo/6031907690.html https://nh.craigslist.org/bpd/5964229121.html

03-10-2017, 07:44 PM	#4
Diver1111 Senior Member Join Date: Jun 2005 Location: Exeter NH Posts: 596 Thanks: 0 Thanked 1,027 Times in 224 Posts	This man Joel contacted me recently about some of the outboards I find now and then. He's in Manchester. I would suggest you contact him because he was not interested for the most part in the newer stuff but instead the older stuff-what you seem to be interested in: www.runneroutboards.com

The Following User Says Thank You to Diver1111 For This Useful Post:
Dad sold the C * C (03-19-2017)

03-11-2017, 07:46 AM	#5
8gv Senior Member Join Date: Jan 2012 Posts: 2,009 Thanks: 61 Thanked 701 Times in 455 Posts	How about... https://nh.craigslist.org/bpo/6038165997.html

The Following User Says Thank You to ishoot308 For This Useful Post:
BroadHopper (03-13-2017)

The Following User Says Thank You to JasonG For This Useful Post:
ishoot308 (03-11-2017)

The Following User Says Thank You to ursa minor For This Useful Post:
JasonG (03-11-2017)

The Following User Says Thank You to ursa minor For This Useful Post:
JasonG (03-13-2017)

03-11-2017, 05:42 PM	#12
tummyman Senior Member Join Date: Aug 2009 Location: Moultonborough Posts: 780 Thanks: 233 Thanked 631 Times in 228 Posts	Did you try M&M Salvage in Meredith across from their transfer satation......they have almost anything used, some very used. Might be worth a peek.....

The Following User Says Thank You to fatlazyless For This Useful Post:
JasonG (03-13-2017)

03-13-2017, 03:10 PM	#15
Woodsy Senior Member Join Date: May 2004 Location: Weirs Beach Posts: 1,949 Thanks: 80 Thanked 969 Times in 432 Posts	Online.... Check out Scream & Fly & Offshore Only http://www.screamandfly.com/ http://www.offshoreonly.com/ Powerboat Swap shop on Facebook... and you might want to check with John Spooner @ Diamond Shine. He is running around in an old Viper.... might have a line on a motor for you. Woodsy __________________ The only way to eliminate ignorant behavior is through education. You can't fix stupid.

The Following User Says Thank You to Woodsy For This Useful Post:
JasonG (03-13-2017)

03-13-2017, 04:41 PM	#16
DesertDweller Senior Member Join Date: Aug 2011 Location: Las Vegas, NV and Moultonborough, NH Posts: 361 Thanks: 24 Thanked 84 Times in 70 Posts	I think calling local outboard dealers is a good way to go. People are re-powering all the time and if you let them know they can keep an eye out for what you are looking for. EBay is another source but likely not local (lots of Florida dealers). I realize you said Mercury, but you might want to consider the old Yamaha 90 (two strokes). Three cylinder, light weight, run great, and near bullet proof. Don't think they changed the engine design for the last twenty years they were available. Used to be a real popular choice for Boston Whaler Montauk re-powers back in the day until they stopped making them.

03-19-2017, 02:55 PM	#18
ursa minor Senior Member Join Date: Aug 2010 Location: Tuftonborough & Franklin MA Posts: 265 Thanks: 99 Thanked 143 Times in 64 Posts	Hey Jason, here's an inline 6 90 HP with controls . Looks to be from about 1978 if I'm remembering my vintage Mercury decals by year. https://boston.craigslist.org/sob/boa/6047632587.html __________________ " Any day with a boat ride in it is a good day"

The Following User Says Thank You to ursa minor For This Useful Post:
Wiezy (03-20-2017)

03-27-2017, 05:00 PM	#20
JasonG Senior Member Join Date: May 2006 Posts: 310 Thanks: 48 Thanked 45 Times in 33 Posts	Found one! Thanks for the responses

03-27-2017, 06:17 PM	#21
ursa minor Senior Member Join Date: Aug 2010 Location: Tuftonborough & Franklin MA Posts: 265 Thanks: 99 Thanked 143 Times in 64 Posts	That's good news, what did you end up with? Please keep us posted on progress with the boat rebuild work as well. __________________ " Any day with a boat ride in it is a good day"