Go Back   Winnipesaukee Forum > Winnipesaukee Forums > Home, Cottage or Land Maintenance
Home Forums Gallery Webcams Blogs YouTube Channel Classifieds Calendar Register FAQDonate Members List Today's Posts

Reply
 
Thread Tools Display Modes
Old 11-08-2015, 10:40 AM   #1
lagoon
Senior Member
 
Join Date: Jul 2012
Posts: 84
Thanks: 35
Thanked 14 Times in 8 Posts
Default Winter Lake Water

OK here is my question;

We have a traditional cottage that draws water from the lake via a pipe now. We are debating adding a winterized small garage home behind it and update the septic and all. The lot is pie shaped so away from the lake it gets narrow and steep. I think there is 75' rule for septic to well.

I was thinking there should be a way to warm up lake pipe so that it does not freeze and we could use it as well.

Any thoughts?
lagoon is offline   Reply With Quote
Old 11-08-2015, 11:31 AM   #2
Descant
Senior Member
 
Join Date: Mar 2006
Location: Merrimack and Welch Island
Posts: 4,033
Thanks: 1,211
Thanked 1,511 Times in 983 Posts
Default

There is a thread called "Using Lake Water year round" in this same forum a few weeks ago. Very thorough discussion.
Descant is offline   Reply With Quote
The Following User Says Thank You to Descant For This Useful Post:
lagoon (11-08-2015)
Old 11-08-2015, 06:06 PM   #3
upthesaukee
Senior Member
 
upthesaukee's Avatar
 
Join Date: Jan 2003
Location: Alton Bay
Posts: 5,547
Blog Entries: 2
Thanks: 2,398
Thanked 1,918 Times in 1,061 Posts
Default Here's the link...

Here's the link:

http://www.winnipesaukee.com/forums/...ad.php?t=19931

( put the link in because as I searched it, I only got this thread as a response.)
__________________
I Live Here... I am always UPTHESAUKEE !!!!
upthesaukee is offline   Reply With Quote
Old 11-09-2015, 08:57 AM   #4
Pine Island Guy
Senior Member
 
Pine Island Guy's Avatar
 
Join Date: Jul 2004
Location: pine island of course!
Posts: 406
Thanks: 237
Thanked 245 Times in 112 Posts
Default lot's of info on the forum

The overall subject of year-round water from the lake has generated several threads with a lot of really good info out on the fourm - using a deep well pump, filtration systems, quick disconnects, and heated water line.

For the heated water line I used a Canadian product (assuming they know cold protection haha)... you can check it out here: http://www.heatline.com/pdfs/carapace_brochure.pdf

Been in use now for 3 years without any issues, and there is a thermostat coupling that you can embed along the line at what should be the coldest point (like where ours goes above ground into the water).

Give me a shout if you'd like more info on the other pieces/parts of the system, happy to help -PIG
Pine Island Guy is offline   Reply With Quote
Old 11-10-2015, 07:14 AM   #5
fatlazyless
Senior Member
 
fatlazyless's Avatar
 
Join Date: Apr 2004
Posts: 8,526
Blog Entries: 1
Thanks: 295
Thanked 957 Times in 698 Posts
Default

Gilford Well, which is located in Gilford close to Wal-Mart, has these winter waterline heated supply lines in their building, and you can go look at them and ask them all about it for a do-it-yourself installation.

One nice feature is that digging the trench is not so diificult because it is recommended to dig a very small and shallow trench ..... like just two inches below the ground surface, and about three inches wide .....no need to dig down below the frost line ....just a small, shallow trench.

The line I installed back in November 1992, a 125' x 1 1/4" black poly tube that cost $1050 has worked perfectly ever since with no issues....hut-hut-hut!
__________________
... down and out, liv'n that Walmart side of the lake!
fatlazyless is offline   Reply With Quote
Sponsored Links
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 12:18 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

This page was generated in 0.23303 seconds