Go Back   Winnipesaukee Forum > Winnipesaukee Forums > Home, Cottage or Land Maintenance
Home Forums Gallery Blogs YouTube Channel Classifieds Calendar Register FAQDonate Members List Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 12-05-2021, 08:42 AM   #1
SailinAway
Senior Member
 
Join Date: Apr 2019
Posts: 429
Thanks: 112
Thanked 160 Times in 93 Posts
Default Replacing wood siding in the winter

Is it possible to replace siding in the winter? I have an area of about 7' wide by 12' high. Both the siding and the underlayment need to be changed. I have the siding and have primed it on one side. I suppose I could add a second coat of paint in the garage (which is around 50 degrees) before cutting and installing it? Is caulking a problem with our current daytime temperatures? (32 degrees on the shaded side of the house)

P.S. This job is available if anyone here is interested. I also have the underlayment onsite.
SailinAway is offline   Reply With Quote
Old 12-05-2021, 11:01 AM   #2
Descant
Senior Member
 
Join Date: Mar 2006
Location: Merrimack and Welch Island
Posts: 3,136
Thanks: 918
Thanked 1,176 Times in 737 Posts
Default shelter

Years ago, I put an addition on the house in mid winter. A different concrete mix for the foundation. Everything else , they just worked along. Stain instead of paint. They pre-heated caulk and roof sealer. Facing south helped.
Descant is offline   Reply With Quote
Old 12-05-2021, 11:32 AM   #3
The Real BigGuy
Senior Member
 
Join Date: Apr 2004
Posts: 812
Thanks: 63
Thanked 279 Times in 170 Posts
Default

Donít use latex caulk at less than 40F. Silicone will work but keep it warm so it flows. Make sure there isnít a thin layer of ice (from air moisture) on the joint - the caulk wonít stick. You can use a hair dryer to melt the ice or wipe with a solvent to melt/remove the ice.


Sent from my iPhone using Winnipesaukee Forum mobile app
The Real BigGuy is online now   Reply With Quote
The Following User Says Thank You to The Real BigGuy For This Useful Post:
SailinAway (12-05-2021)
Old 12-05-2021, 12:11 PM   #4
John Mercier
Senior Member
 
Join Date: Jun 2021
Posts: 707
Thanks: 0
Thanked 157 Times in 135 Posts
Default

On wood siding, prime all sides and any cuts (you can purchase a dauber of primer that makes that easy). Silicone caulking... be careful as some do not accept paint/stain which will be applied later as temperatures warm up.

If you can, cover the CDX with a HydroGap or comparable product rather than a Tyvek. It has raised spots on it that will allow for a gap that condensation will escape through... it lengthens the life of the siding, and applied architectural coating (paint/stain).

If you intend to use an oil-based stain like a Cabot OVT, make sure the primer and caulking that you are using is compliant with that product.
John Mercier is offline   Reply With Quote
Old 12-05-2021, 09:20 PM   #5
TheProfessor
Senior Member
 
Join Date: Nov 2010
Posts: 799
Thanks: 16
Thanked 235 Times in 146 Posts
Default

Quote:
Originally Posted by SailinAway View Post
Is it possible to replace siding in the winter?
New houses are constructed all year long.

As suggested above. Prime both sides.
Do note that most (not all) paint and stain are water based.
Some sort of barrier or wrap is usually placed before siding is put on.
As far as caulking. Read the labels and get the best.

On finding a qualified carpenter. Well. Good luck on that one.

But maybe there are some semi-retired experts on the forum that could provide some assistance.
TheProfessor is offline   Reply With Quote
The Following User Says Thank You to TheProfessor For This Useful Post:
SailinAway (12-06-2021)
Sponsored Links
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 04:02 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.

This page was generated in 0.22133 seconds