Caulking removal ?

bigdog · 02-20-2016, 11:44 PM

Just installed new bathroom sink. Set sink with latex silicon caulking.

Unfortunately, made quite a mess with caulk and need to remove around sink and countertop. Tried to clean up as much as I could with wet cloth but that stuff just smears around.

Suggestions to remove caulk which is now cured?

ApS · 02-21-2016, 06:17 AM

I own a tube of silicone caulk remover, but have yet to use it.

This site says that use of the above caulk remover will leave a tainted surface that is difficult to reseal. A hair dryer or heat gun—plus a razor blade—is suggested on surfaces that won't melt or burn.

.

brk-lnt · 02-21-2016, 08:04 AM

A sharp razor blade to "shave" it off is your best option. Hopefully your sink is not a material that scratches easily.

fatlazyless · 02-21-2016, 08:39 AM

U know the auto parts stores like VIP carry a razor blade scraper for about 3-dollars that is much better than what u get at Lowe's or Walmart even though it uses the same single edge blades. It has a long handle similar to a screw driver, and a better design and stronger, steel holder for the blade.

Giving the old caulk some heat with a heat gun or a hair dryer should definitely help.

SIKSUKR · 02-22-2016, 02:57 PM

http://www.popularmechanics.com/home...a1448/4213124/

02-20-2016, 11:44 PM	#1
bigdog Senior Member Join Date: Apr 2006 Location: Central MA-Gilford Posts: 1,411 Thanks: 308 Thanked 117 Times in 94 Posts	Caulking removal ? Just installed new bathroom sink. Set sink with latex silicon caulking. Unfortunately, made quite a mess with caulk and need to remove around sink and countertop. Tried to clean up as much as I could with wet cloth but that stuff just smears around. Suggestions to remove caulk which is now cured?

02-21-2016, 08:04 AM	#3
brk-lnt Senior Member Join Date: Aug 2007 Location: South Down Shores Posts: 1,938 Thanks: 533 Thanked 568 Times in 334 Posts	A sharp razor blade to "shave" it off is your best option. Hopefully your sink is not a material that scratches easily. __________________ [insert witty phrase here]

02-21-2016, 08:39 AM	#4
fatlazyless Senior Member Join Date: Apr 2004 Posts: 8,528 Blog Entries: 1 Thanks: 296 Thanked 957 Times in 698 Posts	U know the auto parts stores like VIP carry a razor blade scraper for about 3-dollars that is much better than what u get at Lowe's or Walmart even though it uses the same single edge blades. It has a long handle similar to a screw driver, and a better design and stronger, steel holder for the blade. Giving the old caulk some heat with a heat gun or a hair dryer should definitely help. __________________ ... down and out, liv'n that Walmart side of the lake!

02-22-2016, 02:57 PM	#5
SIKSUKR Senior Member Join Date: Apr 2004 Posts: 5,075 Thanks: 215 Thanked 903 Times in 509 Posts	http://www.popularmechanics.com/home...a1448/4213124/ __________________ SIKSUKR

02-21-2016, 06:17 AM	#2
ApS Senior Member Join Date: Jan 2005 Location: Florida (Sebring & Keys), Wolfeboro Posts: 5,788 Thanks: 2,085 Thanked 742 Times in 532 Posts	I own a tube of silicone caulk remover, but have yet to use it. This site says that use of the above caulk remover will leave a tainted surface that is difficult to reseal. A hair dryer or heat gun—plus a razor blade—is suggested on surfaces that won't melt or burn. .

The Following User Says Thank You to brk-lnt For This Useful Post:
Major (02-22-2016)

The Following User Says Thank You to SIKSUKR For This Useful Post:
bigdog (03-01-2016)