Go Back   Winnipesaukee Forum > Winnipesaukee Forums > Boating > Boat Repairs & Maintenance
Home Forums Gallery Blogs YouTube Channel Classifieds Calendar Register FAQDonate Members List Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 08-11-2021, 12:04 PM   #1
Senior Member
bigdog's Avatar
Join Date: Apr 2006
Location: Central MA-Gilford
Posts: 1,308
Thanks: 257
Thanked 106 Times in 87 Posts
Default Oil change problem ?

I just went to change my oil in my 4.3L MerCruiser engine.....

I've done this before using a hand pump I purchased at boat supply store.
The pump has an inlet hole where you connect a plastic tube, the other end over the dipstick (yes I removed the dipstick). The other inlet hole you connect another plastic hose, where the pumped oil will come out.

The issue is, when I start pumping, no oil comes out, it's like there's something wrong with the pump ? I've only used this pump 'one' time, in the past, so confused ?

As an alternative solution, is there an electric pump or a pump that can be attached to my electric drill to pump out the oil ?

Thanks for you comments, much appreciated !

Last edited by bigdog; 08-11-2021 at 12:07 PM. Reason: spell
bigdog is offline   Reply With Quote
Old 08-11-2021, 01:02 PM   #2
Blue Thunder
Senior Member
Blue Thunder's Avatar
Join Date: Apr 2004
Location: Eastern MA & Frye Island/Sebago Lake, Maine
Posts: 919
Thanks: 235
Thanked 306 Times in 144 Posts

I bought one of these about six years ago. It makes everything so easy and cleanup is quick. I use it on the boat, jetski, lawnmower and snowblower….

" Live for today because yesterday is gone and tomorrow may never come"
Blue Thunder is offline   Reply With Quote
Old 08-11-2021, 01:08 PM   #3
Senior Member
Join Date: May 2004
Location: Weirs Beach
Posts: 1,857
Thanks: 69
Thanked 892 Times in 396 Posts

If its something like this, you need to make sure all the connections are tight and its not leaking vacuum anywhere. I have had mine for years and it works mint!


The only way to eliminate ignorant behavior is through education. You can't fix stupid.
Woodsy is offline   Reply With Quote
The Following User Says Thank You to Woodsy For This Useful Post:
Cal Coon (08-13-2021)
Old 08-11-2021, 01:35 PM   #4
Senior Member
Join Date: Mar 2006
Location: Merrimack and Welch Island
Posts: 3,475
Thanks: 1,013
Thanked 1,313 Times in 843 Posts
Default air leak?

It sounds like an air leak someplace. Perhaps a split in the plastic tubes?
Descant is offline   Reply With Quote
Old 08-11-2021, 02:03 PM   #5
Senior Member
8gv's Avatar
Join Date: Jan 2012
Posts: 1,875
Thanks: 58
Thanked 656 Times in 424 Posts

You may have lost the washer that goes in the female screw on fitting.

Also, these work best with “run around the lake” hot oil, not “let it idle for a while at the dock” warm oil.
8gv is online now   Reply With Quote
Sponsored Links
Old 08-12-2021, 08:26 AM   #6
Senior Member
BroadHopper's Avatar
Join Date: Oct 2004
Location: Laconia NH
Posts: 5,366
Thanks: 2,926
Thanked 1,053 Times in 756 Posts
Default Old school.

I fitted a rubber hose to the drain plug on the oil pan. The rubber is long enough to attach to the transom. If the boat is out of the water, I would run the hose through the drain in the transom and remove the oil. If the boat is in the water I would fit the hose to a drain pump. Pretty slick!
Someday may never be an actual day.
BroadHopper is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -4. The time now is 09:31 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.

This page was generated in 0.15872 seconds