|
Home | Forums | Gallery | Webcams | Blogs | YouTube Channel | Classifieds | Calendar | Register | FAQ | Donate | Members List | Today's Posts | Search |
|
Thread Tools | Display Modes |
11-05-2011, 02:30 PM | #1 |
Senior Member
Join Date: May 2005
Location: Isola Gatto Nero
Posts: 696
Thanks: 162
Thanked 263 Times in 81 Posts
|
Aqua-Therm questions
This is my first year using an aqua-therm around my dock and I have a couple of questions that I'm sure lots forum members have opinions on.
I have a 1/2 HP de-icer strung between two docks that form a U. It hangs about 4' down in about 6' of water. I also purchased a time and temperature controller. I currently have the temp gauge set to 30 degrees. My questions are: 1) Is that temp setting OK or should it be higher/lower? 2) How long and how often I should I have it run when it drops below the set temperature? 3) Where can I buy the official Danger, Thin Ice sign? Thanks in advance.
__________________
La vita è buona su Isola Gatto Nero |
11-05-2011, 04:12 PM | #2 | |
Senior Member
Join Date: Jan 2005
Posts: 2,084
Thanks: 1,267
Thanked 557 Times in 286 Posts
|
Quote:
|
|
11-05-2011, 04:22 PM | #3 |
Senior Member
Join Date: Mar 2010
Posts: 392
Thanks: 177
Thanked 146 Times in 76 Posts
|
1- I would think that 30 degrees is a good temp to set it at. If the temp rises above 30 degrees it won't run and below 30 it will. Personally I don't bother with temp controls. All the aquatherms I deal with are run strictly by a time clock.
2- At least twice per day. I set the ones I deal with for 2 four hours cycles. I don't see why 3 or 4 two hour cycles wouldn't work as well. I set them for a 4 hour cycle to run from 1am to 5am and then again at 1pm to 5pm. 3- the "Danger Thin Ice" sign can be purchased at most hardware stores. I think I paid $40+ for one last year. They are typically plastic and will get fairly brittle in the cold. Be sure to back it up with a piece of plywood for support. I am sure others will chime in with variations on temps and clock settings but the above is just the way I am used to doing it. |
11-05-2011, 04:58 PM | #4 |
Senior Member
Join Date: May 2005
Location: Isola Gatto Nero
Posts: 696
Thanks: 162
Thanked 263 Times in 81 Posts
|
I did that before I posted but I didn't find one that met the NH rules.
__________________
La vita è buona su Isola Gatto Nero |
The Following User Says Thank You to Gatto Nero For This Useful Post: | ||
secondcurve (11-05-2011) |
11-05-2011, 05:17 PM | #5 |
Senior Member
Join Date: Apr 2004
Location: Moultonboro, NH
Posts: 2,860
Thanks: 461
Thanked 666 Times in 366 Posts
|
I think Heath's hardware sells the signs as do probably most of the hardware stores around the lake. Temperature is not a bad way to run it although will probably run too much at the beginning of winter and not enough near the end when 32 will bring pretty rapid freezing especially at night. I find that pretty much below 15 to 20 degrees daytime temps that I need to run it all day. Obviously you don't need to run until ice in.
|
Sponsored Links |
|
11-06-2011, 09:21 AM | #6 |
Senior Member
Join Date: Sep 2004
Posts: 1,254
Thanks: 423
Thanked 366 Times in 175 Posts
|
Stupid question:
Does the water have to be circulating to "prevent" the ice from forming or does the process of moving warmer water under the ice melt it? Less Stupid question: How do you deal with GFI breaker tripping on such a mission critical process? |
11-06-2011, 11:26 AM | #7 |
Senior Member
Join Date: Mar 2010
Posts: 392
Thanks: 177
Thanked 146 Times in 76 Posts
|
I believe it is actually the combination of both, the fact that the water is a bit warmer and that it's moving (agitation) that does the job the most efficiently.
Personally, I would not use a GFI protected circut or outlet for that very reason and I don't care what the safety police think. The breaker you might be ok with but the outlets are just to sensitive and are prone to failure. |
The Following User Says Thank You to MarkinNH For This Useful Post: | ||
Rattlesnake Guy (11-07-2011) |
11-07-2011, 07:28 AM | #8 |
Senior Member
Join Date: Aug 2007
Posts: 446
Thanks: 70
Thanked 57 Times in 40 Posts
|
We got our sign at Watermark.
|
Bookmarks |
|
|