Go Back   Winnipesaukee Forum > Winnipesaukee Forums > Boating
Home Forums Gallery Webcams Blogs YouTube Channel Classifieds Calendar Register FAQDonate Members List Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 05-14-2019, 07:02 PM   #1
Sam603
Member
 
Join Date: Mar 2018
Posts: 24
Thanks: 10
Thanked 2 Times in 2 Posts
Default Boat waxing

So I hate to admit it but my boat will soon see it’s 3rd season in the water and I have not waxed it yet, I’m usually good with the cars just don’t give the boat much thought even though I know it needs to be done. It still looks great with a few light scratches so my question is should I use an orbital buffer with a polish to remove them or wait and just wax the boat? I don’t want to prematurely damage the gel coat with buffing but I do have some experience and hours buffing the clear coats on cars. Any suggestions on how and what to use thanks


Sent from my iPhone using Winnipesaukee Forum mobile app
Sam603 is offline   Reply With Quote
Old 05-14-2019, 07:31 PM   #2
SAB1
Senior Member
 
Join Date: Feb 2012
Location: Tuftonboro
Posts: 1,162
Thanks: 182
Thanked 297 Times in 220 Posts
Default

Try a random orbital with a good pad and try 3m finesse first. If it needs more a little rubbing compound and the go back to finesse followed by polish
SAB1 is offline   Reply With Quote
Old 05-15-2019, 05:41 AM   #3
Rich
Senior Member
 
Join Date: Jun 2012
Location: Derry / Gilford
Posts: 1,218
Thanks: 66
Thanked 341 Times in 231 Posts
Default

Sometimes scratches may require some wet sanding, then compound and follow it with the polishing.

As said 3M "finesse it" is good, I've also had luck with Surhold "buff magic".
__________________
Don't listen to me, obviously I don't understand what I'm talking about!
Let's help each other save time and money: WinniGas.com

Last edited by Rich; 05-16-2019 at 06:17 AM.
Rich is offline   Reply With Quote
Old 05-15-2019, 10:02 AM   #4
brk-lnt
Senior Member
 
brk-lnt's Avatar
 
Join Date: Aug 2007
Location: South Down Shores
Posts: 1,937
Thanks: 532
Thanked 568 Times in 334 Posts
Default

You shouldn't cause any harm to the gelcoat with standard buffing/polishing, unless you have a very cheap boat with thinner-than-normal gelcoat.

A random orbital unit, an orange pad, and some Star brite PTEF would probably be my first approach in the scenario you described.
__________________
[insert witty phrase here]
brk-lnt is offline   Reply With Quote
Old 05-15-2019, 10:53 AM   #5
BroadHopper
Senior Member
 
BroadHopper's Avatar
 
Join Date: Oct 2004
Location: Laconia NH
Posts: 5,504
Thanks: 3,113
Thanked 1,089 Times in 783 Posts
Default Detailing

Not exactly 'rocket science', common sense goes a long way!
Plenty of websites for tips and tricks, my fav is 'Detailed Image'.
3M has some excellent articles/videos on boat detailing. That would be my first go to.
If you have a brand new boat or if the finish is still glossy, the 3M finesse polish using a random orbiter will be the first step. The second step will be the sealer or wax. 3M make pretty good wax.
https://www.3m.com/3M/en_US/company-...94857497&rt=r3
Personally I use Duragloss products. Available at Robbins Auto Parts on Union Ave in Laconia. The sealant lasts a good year, easy on and off. I use the quick detailer between waxing after a wash or rinse. Keeps the boat looking like it was just wax!
__________________
Someday may never be an actual day.
BroadHopper is offline   Reply With Quote
Sponsored Links
Old 05-15-2019, 01:15 PM   #6
Sam603
Member
 
Join Date: Mar 2018
Posts: 24
Thanks: 10
Thanked 2 Times in 2 Posts
Default

Thanks for the advice now hopefully this weekends weather will cooperate.


Sent from my iPhone using Winnipesaukee Forum mobile app
Sam603 is offline   Reply With Quote
Old 05-16-2019, 05:05 PM   #7
MIKE RGR
Member
 
Join Date: Jan 2019
Posts: 25
Thanks: 8
Thanked 1 Time in 1 Post
Default New boat

Evening All

Sam, dont mean to hijack your post but this seems like the right place to ask this question.

Getting a new boat in a couple of weeks and was considering waxing it before the first launch. Was going to wax the entire hull including below the waterline. I thought I had heard some pros and cons of waxing the hull. Also was going to use Meguiars Boat Wax

Any suggestions greatly appreciated.

Thanks
mike

Last edited by MIKE RGR; 05-16-2019 at 05:57 PM.
MIKE RGR is offline   Reply With Quote
Old 05-16-2019, 07:55 PM   #8
SAB1
Senior Member
 
Join Date: Feb 2012
Location: Tuftonboro
Posts: 1,162
Thanks: 182
Thanked 297 Times in 220 Posts
Default

As bark-int said the starbrite stuff with Teflon is top notch. My boat is a 1997 and I’ve never used anything but that polish. Boat is still in showroom condition. Nothing does more harm to glass than the sun. To keep it top notch shape you definitely have to work at it.
SAB1 is offline   Reply With Quote
Old 05-17-2019, 03:19 PM   #9
Descant
Senior Member
 
Join Date: Mar 2006
Location: Merrimack and Welch Island
Posts: 4,004
Thanks: 1,204
Thanked 1,498 Times in 975 Posts
Default

Quote:
Originally Posted by MIKE RGR View Post
Evening All

Sam, dont mean to hijack your post but this seems like the right place to ask this question.

Getting a new boat in a couple of weeks and was considering waxing it before the first launch. Was going to wax the entire hull including below the waterline. I thought I had heard some pros and cons of waxing the hull. Also was going to use Meguiars Boat Wax

Any suggestions greatly appreciated.

Thanks
mike
"New boat" Isn't this part of the dealer prep?
Descant is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 05:20 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

This page was generated in 0.32128 seconds