Go Back   Winnipesaukee Forum > Winnipesaukee Forums > Boating > Boat Repairs & Maintenance
Home Forums Gallery Webcams Blogs YouTube Channel Classifieds Calendar Register FAQDonate Members List Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 09-26-2019, 04:41 PM   #1
thinkxingu
Senior Member
 
thinkxingu's Avatar
 
Join Date: Jul 2014
Posts: 5,939
Thanks: 1,152
Thanked 1,959 Times in 1,210 Posts
Default Rowboat Drain?!

Hi!
Is it possible that an Alumacraft rowboat would NOT have a drain plug? I can't seem to find one in this boat and it's filling up from rain!

Sent from my SM-G950U using Winnipesaukee Forum mobile app
thinkxingu is offline   Reply With Quote
Old 09-26-2019, 04:51 PM   #2
DickR
Senior Member
 
Join Date: Apr 2008
Location: Moultonborough
Posts: 734
Thanks: 4
Thanked 254 Times in 166 Posts
Default

Given that small a boat, if you can't see it, it isn't there. Go up to the Aubuchon, buy a small PVC fitting, flanged nut, and square plug, some waterproof sealant, and maybe a drill bit. Bore a hole to match the fitting down low on the stern, install the parts, done. Or just cut up a used milk jug and bail as required.
DickR is offline   Reply With Quote
Old 09-26-2019, 04:57 PM   #3
ishoot308
Senior Member
 
Join Date: Feb 2008
Location: Gilford, NH / Welch Island
Posts: 5,907
Thanks: 2,279
Thanked 4,924 Times in 1,906 Posts
Default

Quote:
Originally Posted by thinkxingu View Post
Hi!
Is it possible that an Alumacraft rowboat would NOT have a drain plug? I can't seem to find one in this boat and it's filling up from rain!

Sent from my SM-G950U using Winnipesaukee Forum mobile app
Yes, many small rowboats were made with no drain plug. I assume reason being is they are small enough to be manhandled, pulled up on shore and tipped to drain. Your best bet is to store either covered, on its side or upside down...

Dan
__________________
It's Always Sunny On Welch Island!!

Last edited by ishoot308; 09-26-2019 at 05:29 PM.
ishoot308 is offline   Reply With Quote
Old 09-26-2019, 04:59 PM   #4
thinkxingu
Senior Member
 
thinkxingu's Avatar
 
Join Date: Jul 2014
Posts: 5,939
Thanks: 1,152
Thanked 1,959 Times in 1,210 Posts
Default

Ok, thanks fellas!

Sent from my SM-G950U using Winnipesaukee Forum mobile app
thinkxingu is offline   Reply With Quote
Old 09-26-2019, 05:28 PM   #5
camp guy
Senior Member
 
camp guy's Avatar
 
Join Date: Apr 2004
Location: formerly Winter Harbor, still Wolfeboro
Posts: 1,130
Thanks: 284
Thanked 480 Times in 271 Posts
Default Rowboat Drain

All good advice, except, no one mentioned the most important Step - when the boat is drained, do not forget to put the plug back in!
camp guy is offline   Reply With Quote
Sponsored Links
Old 09-27-2019, 02:01 AM   #6
fatlazyless
Senior Member
 
fatlazyless's Avatar
 
Join Date: Apr 2004
Posts: 8,506
Blog Entries: 1
Thanks: 291
Thanked 950 Times in 692 Posts
Default ..... gotta go to Fays!

www.faysboatyard.com/service/chandlery-the-ship/ in Gilford on Route 11 has maybe six different styles of nylon drain plugs for small boats that have either a round or diamond shaped flange with a threaded drain plug in black or white for about five dollars and less.

Surrounded by pricey sailboat items made by Harken, their nylon drain plug assemblies are the least expensive item in this totally well stocked store for original Laser, Hobie, Harken and other brand, sailing items.

Fays' is the place to go ...... check out their bargain box of reduced price, left over, colorful lengths in different diameters from 1-cm to 11-cm ..... very high quality, shorter left-over lengths of yacht line, used for a row boat bowline, or something ..... short lengths for short money!
__________________
... down and out, liv'n that Walmart side of the lake!
fatlazyless is offline   Reply With Quote
The Following User Says Thank You to fatlazyless For This Useful Post:
FlyingScot (09-27-2019)
Old 09-27-2019, 06:16 AM   #7
SAMIAM
Senior Member
 
Join Date: Apr 2004
Location: Moultonborough
Posts: 2,834
Thanks: 326
Thanked 1,625 Times in 561 Posts
Default

I lost the plug on my 14' Alumacracft and couldn't find a match so I'm using a wine bottle stopper and it works fine.
SAMIAM is offline   Reply With Quote
Old 09-27-2019, 07:34 AM   #8
thinkxingu
Senior Member
 
thinkxingu's Avatar
 
Join Date: Jul 2014
Posts: 5,939
Thanks: 1,152
Thanked 1,959 Times in 1,210 Posts
Default

Quote:
Originally Posted by SAMIAM View Post
I lost the plug on my 14' Alumacracft and couldn't find a match so I'm using a wine bottle stopper and it works fine.
Nice!

I had the police come to verify the boat since it hadn't been registered for a while, and it comes up as being built in 1948. I'm interested to know if that's true.

Sent from my SM-G950U using Winnipesaukee Forum mobile app
thinkxingu is offline   Reply With Quote
Old 09-27-2019, 08:10 AM   #9
Bear Guy
Senior Member
 
Bear Guy's Avatar
 
Join Date: Mar 2003
Location: FL, Bear Is.
Posts: 174
Thanks: 42
Thanked 64 Times in 36 Posts
Default

Quote:
Originally Posted by thinkxingu View Post
the boat ... comes up as being built in 1948. I'm interested to know if that's true.
Alumacraft brand was established in 1946, with their early best seller the 12-foot Model B. Therefore quite plausible your 1948 date is valid.

Here's an image of 1947 model B from antiqueboatamerica.com:
Bear Guy is offline   Reply With Quote
Old 09-27-2019, 08:36 AM   #10
fatlazyless
Senior Member
 
fatlazyless's Avatar
 
Join Date: Apr 2004
Posts: 8,506
Blog Entries: 1
Thanks: 291
Thanked 950 Times in 692 Posts
Default

If you want to restore the aluminum and make it clean and shiny ....... you know what works good ..... a 5-dollar gallon of Heinz white vinegar from the super market ...... and a sponge/scrubber ...... aluminum gets cleaned and restored by the acidic acid in white vinegar to make it look almost like new.

Is easy to do ..... goes down fast ..... with a big scrubber sponge and rubber gloves.
__________________
... down and out, liv'n that Walmart side of the lake!
fatlazyless is offline   Reply With Quote
Old 09-27-2019, 12:09 PM   #11
Descant
Senior Member
 
Join Date: Mar 2006
Location: Merrimack and Welch Island
Posts: 4,004
Thanks: 1,204
Thanked 1,498 Times in 975 Posts
Default Lost plugs

People lose drain plugs all the time so most marinas sell them. They also have brass sleeves to go with it for a nice fit. Drill the hole, bedding compound, and slide it in. Get one sleeve and two plugs or attach the plug with a dummy chain.

I suggest the plug be oriented so you remove it inside the boat, not from outside. If you ever add a small motor, removing the plug to drain while underway is awkward at best.
For bailing, you can get a large "Marine Sponge" that "conforms to the shape of your hull". $18.95. Or a regular sponge for $3.98 at the hardware store. LOL
Descant is offline   Reply With Quote
Old 09-27-2019, 08:09 PM   #12
fatlazyless
Senior Member
 
fatlazyless's Avatar
 
Join Date: Apr 2004
Posts: 8,506
Blog Entries: 1
Thanks: 291
Thanked 950 Times in 692 Posts
Default

Nice thing about a 12' or 14' rowboat is how winterizing it can be accomplished by simply removing everything from the boat and rolling it over, upside down, so it sheds the rain and the snow can get removed if too heavy for the boat.

When storing a 16'-18'-20' boat under a tarp in your driveway for the winter, it seems like water will always find a way to get into the boat and down into the bilge. Once it freezes in the bilge it can damage the hull or damage a bilge pump.

What to do? I've installed a nylon threaded drain plug and flange on the outside, bottom of the hull on a 16' Alumacraft with a 40-hp outboard in the middle of the bilge area , about one foot distance from the transom.

And, it works pretty good after five years ..... so far so good ...... and rain or melting snow that gets into the boat will drain down and out this lower drain hole.

This has got to be the greatest boat bilge, drain plug installation, in the world history of boat bilge drain plugs ...... ever, ever, ever made ..... ever!
__________________
... down and out, liv'n that Walmart side of the lake!
fatlazyless is offline   Reply With Quote
Old 09-27-2019, 10:38 PM   #13
8gv
Senior Member
 
8gv's Avatar
 
Join Date: Jan 2012
Posts: 2,002
Thanks: 61
Thanked 700 Times in 455 Posts
Default

My 12' Starcraft had a rolled gunnel.

One winter, with the boat stored upside down, the gunnel filled with water and then froze.

It split the lower section of about 6" of the gunnel.

After that I stored the boat upside down but with a significant bow to stern tilt.

There was no more freeze damage after that.
8gv is offline   Reply With Quote
Old 09-30-2019, 05:29 PM   #14
arthurc
Senior Member
 
arthurc's Avatar
 
Join Date: Apr 2004
Location: Moultonborough
Posts: 82
Thanks: 3
Thanked 1 Time in 1 Post
Default Alumacraft No Drain

Get in touch with Alumacraft.They can give you info about the boat including
wheere the drain is. I had one and i think the drain is attttached somewhere on the botttom.

The boat is an antique so go big if you sell it.
arthurc is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 02:59 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

This page was generated in 0.26780 seconds