Winnipesaukee Forum - View Single Post

The Winster · 04-30-2017, 02:51 PM

Wondering if anyone can offer some advise for lowering an aluminum dock with a Dutton brake winch. The winch requires a minimum of 75 pounds of pull on the line in order to be able to cranked out. When the dock is lowered to the point where most of the load is relieved from the winch cable we end up with a spinning handle and the aluminum lift arm still up in the air. None of the methods we've used in prior years have been particularly easy (or graceful) so any recommendations/suggestions would be welcomed.

04-30-2017, 02:51 PM	#1
The Winster Senior Member Join Date: Jan 2015 Location: Connecticut and Tuftonboro Posts: 55 Thanks: 106 Thanked 41 Times in 18 Posts	Tips for lowering aluminum dock Wondering if anyone can offer some advise for lowering an aluminum dock with a Dutton brake winch. The winch requires a minimum of 75 pounds of pull on the line in order to be able to cranked out. When the dock is lowered to the point where most of the load is relieved from the winch cable we end up with a spinning handle and the aluminum lift arm still up in the air. None of the methods we've used in prior years have been particularly easy (or graceful) so any recommendations/suggestions would be welcomed.