View Single Post
Old 11-18-2010, 11:58 AM   #284
Wolfeboro_Baja
Senior Member
 
Wolfeboro_Baja's Avatar
 
Join Date: Jan 2008
Location: Hopkinton NH
Posts: 395
Thanks: 88
Thanked 80 Times in 46 Posts
Default

Regarding ALL the discussion that's been had in this thread and the two letters to the editor posted here, how can the BP NWZ not be wide enough for two boats to pass each other while maintaining the minimum 150' between both crafts and shore? Using Google Earth, I measured the width of that area; the minimum width I found, shore to shore, was 825 ft while other areas were greater than 900 ft. Two boats passing each other would need an absolute minimum of 450' to allow for distances between themselves and shore on either side. Even if you allow 500', that STILL leaves 300'+ to maintain distance from other boats and shore. What am I missing when so many people are saying it's too narrow?!?!?

Just for reference, the Eagle Island NWZ measured at 710' at it's narrowest, also using Google Earth. I can't tell you how many boats I've seen blowing through this one on plane; I've even caught the Doris E (or Sophie C, I don't remember which) buzzing through without slowing down!

Granted, I don't know how accurate (or inaccurate) Google Earth is when it comes to measuring but unless someone has strung a tape measure across or used surveying instruments, it's close enough for me!
Wolfeboro_Baja is offline