Thread: ECM no good
View Single Post
Old 02-13-2026, 09:54 AM   #12
Bootkie2
Member
 
Join Date: Dec 2016
Posts: 36
Thanks: 1
Thanked 9 Times in 7 Posts
Default

Quote:
Originally Posted by puremaple View Post
I dont have the write up in front of me but, I brought it in for not starting after stalling while out for a run... I thought it was old fuel so I did the fresh gas in a portable can with the primer ball to a new filter and was able to get it running for 15 seconds, then nothing after that.
They found good compression, and dry cylinders so they removed fuel rack and were able to determine that the injectors worked with ecm bypassed and concluding that the ecm was not giving the signal to the injectors.

Went to the boat show, so I will be looking forward to sending this out to be tested for 80 bucks.
ECU failure isn’t super common, and from how you described it, it sounds like the diagnosis may have taken a bit of a roundabout path with some mixed signals along the way. The easiest test probably would’ve been to bolt your ECU onto a known-good 7.4 and see if the stalling followed it. That would’ve confirmed things with a high level of certainty pretty quickly instead of sending you down the rabbit hole of ECU tuning and repair. Sounds like you are already down that path though so keep us posted and let us know how it works out!

Last edited by Bootkie2; 02-13-2026 at 10:11 AM. Reason: spelling mistakes
Bootkie2 is offline   Reply With Quote
The Following User Says Thank You to Bootkie2 For This Useful Post: