I had a 10 foot 5 inch rigid inflatable that was an Avon rebranded West Marine boat.
The boat weighed 160, add 90 for the outboard, another 50 for the launch wheels, then the gas tank and you are over 300 lbs pretty quickly. Pulling that out of the water up a slope in soft sand is tough even for people in decent shape. If you have any health problems or are not up to it, forget the rigid inflatable.
You also have to think about storage. Will you store it indoors or out? Rigid inflatables are harder to store. They are great boats for specific purposes but I think you would be better served with a different boat.
How many people will be in the boat? What kind of gear will you be bringing back and forth to the mooring?
The materials used for inflatables are hypalon and pvc. The hypalon is either Achilles from Japan or there is another French make that Zodiac uses. PVC is from several sources be careful of cheep chinese junk. Hypalon is the best but expensive.
Your best bet would probably be shopping PVC inflatables, looking at the material, warranty, and reputation of the manufacturer. Maybe looking at a rigid floor like wood or aluminum that you can disassemble and literally store in a closet, or a rollup slat floor.
Inflatables don't row well at all. If you are only rowing a hundred feet or so you'd be fine.
Store your boat under a cover when not in use. It will last longer.
Also, pay attention to the inflation. There is a huge difference in pressure between a hot and cool day. If you inflate it fully on a cool day and the temperature rises to the mid 90's,
The boat's seams can fail so you should back off the pressure when not in use and top it off when you use it. Some boats have a pressure relief valve just for that.
Inflatables can be really light, totally stable, carry tremendous weight for their size, and unsinkable but you have to pick the right one for your use.
Hope this helps.
|