Thread: Freezing Pipes
View Single Post
Old 04-06-2006, 05:57 AM   #7
ApS
Senior Member
 
ApS's Avatar
 
Join Date: Jan 2005
Location: Florida (Sebring & Keys), Wolfeboro
Posts: 6,069
Thanks: 2,318
Thanked 798 Times in 571 Posts
Smile DIY, by the Tool-Men-of-the-Lake

Quote:
Originally Posted by Steveo
"...OK, I will give you some positive info here..."
Me too: And once again I agree fully with the Winnipesaukee-burnished FLL.

I've opened in late March: Some mornings, no water would arrive at the kitchen spout, but never did have a pipe burst. (If no water appears but the pump is running, you'll have to shut off the pump—right away).

The only burst I've ever experienced was due to a deficient closing-up by a local drunk who formerly did closing-ups for us. (The drunk part I found out later—DWI/Corvette). He also used "used" automobile anti-freeze!

Now I do the closing-ups.

I fixed that one hole temporarily by threading a yarn (taken from a mop) into the hole, and squeezing the split shut with Vise-Grips. The leak stopped completely in an hour, and waited two years to be fixed when I added another appliance that required soldering!

It may help somewhat if the water is delivered uphill by a large (1"ø) black plastic water pipe which can allow some "warm water" thermo-siphoning.

To hedge all bets, a small plastic tarp is tented over the pump. That, plus a 40-watt light bulb—keeps it all safe until all freezing hazards have passed. (Unplug the pump during any absences).

Soldering is not a difficult skill to learn, and most tiny leaks that can result (from a first try) will seal themselves.

ApS is offline   Reply With Quote