View Single Post
Old 06-29-2005, 07:33 AM   #7
PROPELLER
Senior Member
 
PROPELLER's Avatar
 
Join Date: Jul 2004
Posts: 340
Thanks: 0
Thanked 0 Times in 0 Posts
Default

If you change your drive unit oil every fall with your engine oil they should see if there is an issue. If its milky then water is getting in somewhere. Also if you have your drive removed at least every other year to grease fittings, replace the gasket & also to inspect if seals are good or bad you can avoid problems. Any I/O manual recommends these preventative measures & should be part of any regular maintenance.
PROPELLER is offline   Reply With Quote