Winnipesaukee Forum - View Single Post

LIforrelaxin · 02-12-2010, 09:21 AM

Like any marine salvage business you have to know what your looking at and make sure you give iit a good inspection before taking it home.

Now Is the old bench seat in good enough shape that you could use the pieces for templates? If so I would use the old pieces for a template and make the seat yourself.
I have done this will seats and side pannels. If you have a jig saw, and a table saw it pretty easy.... even if you don't have a table saw, it isn't that bad.....

02-12-2010, 09:21 AM	#2
LIforrelaxin Senior Member Join Date: May 2006 Location: Texas, Lake Ray Hubbard and NH, Long Island Winnipesaukee Posts: 2,875 Thanks: 1,037 Thanked 892 Times in 524 Posts	Like any marine salvage business you have to know what your looking at and make sure you give iit a good inspection before taking it home. Now Is the old bench seat in good enough shape that you could use the pieces for templates? If so I would use the old pieces for a template and make the seat yourself. I have done this will seats and side pannels. If you have a jig saw, and a table saw it pretty easy.... even if you don't have a table saw, it isn't that bad..... __________________ Life is about how much time you can spend relaxing... I do it on an island that isn't really an island.....