Winnipesaukee Forum - View Single Post

trfour · 12-16-2009, 11:19 PM

You could have an identical track, (Length & Height Lugs) the more horsepower, the more studs you will need and this will require a different template. This is why it is very important to check with you're dealer- supplier.
Studs are the only way to go here in central NH. Now, if you only ride in the far north and stay away from frozen water, you can get away with a stock, bare track.

12-16-2009, 11:19 PM	#23
trfour Senior Member Join Date: Nov 2002 Location: The Lakes, Central NH. and Dallas/Fort Worth TX. Posts: 3,694 Blog Entries: 3 Thanks: 3,069 Thanked 472 Times in 236 Posts	For The Do It Yourself'ers... You could have an identical track, (Length & Height Lugs) the more horsepower, the more studs you will need and this will require a different template. This is why it is very important to check with you're dealer- supplier. Studs are the only way to go here in central NH. Now, if you only ride in the far north and stay away from frozen water, you can get away with a stock, bare track. __________________ *trfour* Always Remember, The Best Safety Device In The Boat, or on a PWC Snowmobile etc., Is YOU! Safe sledding tips and much more; http://www.snowmobile.org/snowmobiling-safety.html