Winnipesaukee Forum

Winnipesaukee Forum (https://www.winnipesaukee.com/forums/index.php)
-   Boating (https://www.winnipesaukee.com/forums/forumdisplay.php?f=5)
-   -   Quality service for Honda Outboard (https://www.winnipesaukee.com/forums/showthread.php?t=8957)

Massasauga 11-27-2009 04:35 PM

Quality service for Honda Outboard
 
I would appreciate any suggestions regarding service for a Honda BF 90 outboard in the lakes region.

Nice 4 stroke but it smokes when you first start the engine (particularly if the engine was left trimmed all the way down). I suspect oil seepage and perhaps it needs a valve adjustment. The motor has done this since it was new (note, the engine now has 525 hours). As I purchase the motor new, I did have it in once for the suggested service and the repair shop claimed they adjusted the valves but I have my doubts...

Thanks...

trfour 11-27-2009 05:35 PM

Melvin Village Marina
(603) 544-3583

Shep Browns Boat Basin
(603) 279-4573

Good luck.

fatlazyless 11-29-2009 06:51 PM

www.riveredgemarina.com on Little Squam in Ashland. The Honda's out number the Mercury's by about five to one at River Edge, so they get a lot of Honda experience. Mostly small-25-40-50-75-90 for Squam size boats.

NoBozo 11-29-2009 07:26 PM

Valve adjustment has Nothing to do with smoking when you start the engine with a 4 stroke engine. Outboard or otherwise. Two strokes will smoke briefly when started up. This is normal. My 1986 350 V8 Mercruiser has a little over 600 hours. No smoke. NB

cowisl 11-30-2009 04:52 PM

Dave Rosetti. 603 393 5658


All times are GMT -5. The time now is 07:47 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.