Winnipesaukee Forum

Winnipesaukee Forum (https://www.winnipesaukee.com/forums/index.php)
-   General Discussion (https://www.winnipesaukee.com/forums/forumdisplay.php?f=3)
-   -   WCYC Wolfeboro CAM (https://www.winnipesaukee.com/forums/showthread.php?t=4208)

KBoater 01-31-2007 11:12 AM

WCYC Wolfeboro CAM
 
Check out the web cam at

http://www.wcyc-nh.com

It takes a while to load and uses JAVA. Double click on the view to load and start the motion. It gives a good view of Wolfeboro Bay to Sewall Point , Barndoor Island and the boards. The time of day can make a difference on the quality of the view since the sun points directly at certain times of day. 11:00 is good. :coolsm:

At night, the lights of Sewall Rd show up. There is a pin point light to the left that is either Barndoor Island, Alton Hills or West Alton.

I think that there are circulators at the docks creating open water :cool: .

I have been watching the ducks in the open watch.

mcdude 01-31-2007 01:44 PM

awesome cam! thanks for the heads up FLBoater! McD:coolsm:

JTA 01-31-2007 03:23 PM

WOW as I was watching .....
 
Would you believe, as I took my first peek at this cam site a snowmobiler was skimming across the open water. He went back and forth twice as I was watching. Awesome!!!

upthesaukee 01-31-2007 05:18 PM

Nice link...thanks.

KBoater 02-05-2007 12:03 PM

Wcyc Cam
 
As stated in another link, there have been some problems with the link to
http://www.wcyc-nh.com/
The club is updating its web site and the CAM is part of it. Be patient with it. You do need Sun Java applets installed to see the pictures. The initial load time of the CAM is long since the motion takes some time to load. If you get the red X, the site may be down. If you get a grey picture the CAM is still loading. I often go to something else in another window then go back when it is loaded. Like so many CAM’s on the lake this one is run by club member volunteers.
It does give you a view of Wolfeboro Bay and there are no other CAMs that I know of that presently do.

JTA 02-05-2007 01:06 PM

Motion
 
It wasn't loading for me yesterday ... today, no problem. It's nice being able to see the motion. Today there is wind blowing snow across the ice. Brrrrr.

Phantom 02-07-2007 07:55 AM

Wolfboro Bay??

All I found on the site (in the links section) was an AWESOME cam in Alton Bay that I wasn't aware of !!

Phantom 02-07-2007 08:08 AM

Wooops ---

As the skit on television (years ago) with Ruth Buzzi use to say ................. "Never Mind"

I found it on the homepage .... it didn't load the first time I hit the site.

Smith Point 02-07-2007 03:45 PM

Totally Awesome Alton bay web cam! I’ve been looking for that one 4years.

Hermit Cover 02-07-2007 06:12 PM

Whoops...
 
Phantom....you're right....it was a great series of skits on SNL..but we all loved Rozanne Rozannadanna when she ranted and raved and was corrected by Jane Curtin....and said, "Never Mind!" The world surely misses Gilda Radner. Oh, yes...the web cam is great!!!:laugh:

Mee-n-Mac 02-07-2007 06:40 PM

Alton Bay cam
 
This has to be the one from the Spencer-Hughes Realty building ? This is great to check on public slip availability. Plenty right now I see. ;)


ps - Wasn't that Emily Litella on SNL ? Roseanne Roseannadanna (?) was the one who always said "It just goes to show you, it's always something." Aaaah SNL back when it was funny.


All times are GMT -5. The time now is 09:37 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.