Winnipesaukee Forum

Winnipesaukee Forum (https://www.winnipesaukee.com/forums/index.php)
-   Home, Cottage or Land Maintenance (https://www.winnipesaukee.com/forums/forumdisplay.php?f=8)
-   -   Lawn/Garden Tractor Talk (https://www.winnipesaukee.com/forums/showthread.php?t=26940)

thinkxingu 04-20-2021 08:13 AM

Lawn/Garden Tractor Talk
 
Greetings!
Since I replaced my snowblower this past winter, I've been thinking about upgrading my tractor this summer. I currently have a Craftsman LT3000 42" that, with only (good) fuel and new oil at the end of each season, hasn't skipped a beat.
I know "garden" tractors are "heavier duty," but do any come stock with tow hitches? I use mine with a custom-welded hitch to tow my splitter and utility trailer around, but I know it's probably taxing the machine a bit.
I'd also be interested in other things to consider, including transmission style, engine size, etc. I won't be using it with a bucket or snowblower attachment or anything like that, I just want a tough(er) machine that can do some towing.

Sent from my SM-G950U using Winnipesaukee Forum mobile app

VitaBene 04-20-2021 08:18 AM

I would run that one until it dies. I would think Hydrostatic trans would be the way to go. I still like Japanese engines- Honda, Kawasaki

trfour 04-21-2021 09:25 PM

Lawn/Garden Tractor Talk
 
1 Attachment(s)
Hi thinkxingu, I had an older LT 1000 Craftsmen two cylinder mower given to me by a Rancher here that had a starting problem, and through cleaning the carb and fuel system and replacing the bearings on the mowing deck and general maintenance. I then used it to mow lawns in many local towns here. Never had any more problems with it, I pulled a lawn sweeper while mowing, in some instances the lawns would be higher than the tractor with no slowdowns, for 4 years when the temps got to be over 100 degrees for over 70 days in a row, so I then found something ells to do and sold it all.

Of course, you can spend what you want, but like VitaBene has said, I would keep it.

TheProfessor 04-22-2021 05:31 AM

Quote:

Originally Posted by thinkxingu (Post 353953)
Greetings!
Since I replaced my snowblower this past winter, I've been thinking about upgrading my tractor this summer. I currently have a Craftsman LT3000 42" that, with only (good) fuel and new oil at the end of each season, hasn't skipped a beat.
I know "garden" tractors are "heavier duty," but do any come stock with tow hitches? I use mine with a custom-welded hitch to tow my splitter and utility trailer around, but I know it's probably taxing the machine a bit.
I'd also be interested in other things to consider, including transmission style, engine size, etc. I won't be using it with a bucket or snowblower attachment or anything like that, I just want a tough(er) machine that can do some towing.


Not clear whether you are seeking a riding mower or a smaller compact tractor sometimes called a landscape tractor.

Take a ride to Ryan Tractor at Exit 20 in Tilton and view what is in stock.

Or take a ride to Warner, NH and view the Mahindra tractors.

LINK

thinkxingu 04-22-2021 06:18 AM

Quote:

Originally Posted by TheProfessor (Post 354124)
Not clear whether you are seeking a riding mower or a smaller compact tractor sometimes called a landscape tractor.

Take a ride to Ryan Tractor at Exit 20 in Tilton and view what is in stock.

Or take a ride to Warner, NH and view the Mahindra tractors.

LINK

I guess what I'm looking for is a heavy duty riding mower. I don't need a bucket/snowblower attachment, etc. but I'd like a heavy enough frame to tow things around.

It's sounding like what I've got should last me a while longer, so maybe I'll just put some money into tune-up parts.

So, can someone suggest what I should be replacing? I'm embarrassed to say I've not done a thing other than oil/filter, blades, battery, and fuel.

I'm thinking:
Spark plug
Deck rebuild kit w/new spindles/belt
Fuel filter

The machine starts and runs perfectly, but it takes time for the blades to wind up and wind down and it doesn't seem to cut as well on one side.

Sent from my SM-G950U using Winnipesaukee Forum mobile app

Lakeboater 04-22-2021 08:41 AM

Belts
 
Quote:

Originally Posted by thinkxingu (Post 354125)
I guess what I'm looking for is a heavy duty riding mower. I don't need a bucket/snowblower attachment, etc. but I'd like a heavy enough frame to tow things around.

It's sounding like what I've got should last me a while longer, so maybe I'll just put some money into tune-up parts.

So, can someone suggest what I should be replacing? I'm embarrassed to say I've not done a thing other than oil/filter, blades, battery, and fuel.

I'm thinking:
Spark plug
Deck rebuild kit w/new spindles/belt
Fuel filter

The machine starts and runs perfectly, but it takes time for the blades to wind up and wind down and it doesn't seem to cut as well on one side.

Sent from my SM-G950U using Winnipesaukee Forum mobile app

The blade issue is most likely a belt problem. They may have worn and stretched over time. Not an expensive fix

NH.Solar 04-22-2021 10:26 AM

Professor,
Ryan Tractor at exit 20 is now MB Tractor and nothing like the original. Luckily though George Ryan is still selling tractors and equipment and has opened a new dealership just outside of Concord on Route 4. As before he specializes in small compacts and I would recommend his company as the first place to visit for anyone looking for a 4wd diesel.
Thinkxingu, I'd recommend that you visit another Concord dealership as your first stop, Greenlands Equipment. Greenlands is now located lass than a half a mile off I-93 on Manchester Street (exit 13). For the residential user they sell primarily Simplicity and Snapper. The Broadmoor series tractor has both rear suspension and a limited slip differential and will pull very impressive loads. Also, the company has been continuously in business since 1937 and when you eventually walk in with a service need or question you'll get an immediate knowledgeable answer. Because of their expertise they would also a good be a good place to consider having the Craftsman serviced but it might prove to be more costly than the machine is worth as box store machines are mostly designed to be tossed rather than serviced ...a sad statement on our wasteful society. If all it needs is a belt and new blades than the Craftsman is likely worth fixing and running into the ground, but if it needs more than that you might want to consider trading it in.

trfour 04-22-2021 12:34 PM

These Vidios should help you
 
Quote:

Originally Posted by thinkxingu (Post 354125)
I guess what I'm looking for is a heavy duty riding mower. I don't need a bucket/snowblower attachment, etc. but I'd like a heavy enough frame to tow things around.

It's sounding like what I've got should last me a while longer, so maybe I'll just put some money into tune-up parts.

So, can someone suggest what I should be replacing? I'm embarrassed to say I've not done a thing other than oil/filter, blades, battery, and fuel.

I'm thinking:
Spark plug
Deck rebuild kit w/new spindles/belt
Fuel filter

The machine starts and runs perfectly, but it takes time for the blades to wind up and wind down and it doesn't seem to cut as well on one side.

Sent from my SM-G950U using Winnipesaukee Forum mobile app

The bracket at the lower back with hole to mount a trailer ball or what ever you need to tow with.

I've been a heavy Truck & Equipment mechanic most of my life so working on a lawn tractor was pretty easy for me. These Vidios should help you thinkxingu.

https://video.search.yahoo.com/yhs/s...88&action=view

thinkxingu 04-22-2021 03:33 PM

Quote:

Originally Posted by trfour (Post 354155)
The bracket at the lower back with hole to mount a trailer ball or what ever you need to tow with.

I've been a heavy Truck & Equipment mechanic most of my life so working on a lawn tractor was pretty easy for me. These Vidios should help you thinkxingu.

https://video.search.yahoo.com/yhs/s...88&action=view

Yeah, I welded a hitch to the back plate so that I could tow more than just a garden trailer, but I know I'm probably at/beyond its expected use.

I'll check out the vids, thanks!

Sent from my SM-G950U using Winnipesaukee Forum mobile app

TheProfessor 04-22-2021 04:38 PM

Quote:

Originally Posted by NH.Solar (Post 354144)
Professor,
Ryan Tractor at exit 20 is now MB Tractor and nothing like the original. Luckily though George Ryan is still selling tractors and equipment and has opened a new dealership just outside of Concord on Route 4. As before he specializes in small compacts and I would recommend his company as the first place to visit for anyone looking for a 4wd diesel.
Thinkxingu, I'd recommend that you visit another Concord dealership as your first stop, Greenlands Equipment. Greenlands is now located lass than a half a mile off I-93 on Manchester Street (exit 13). For the residential user they sell primarily Simplicity and Snapper. The Broadmoor series tractor has both rear suspension and a limited slip differential and will pull very impressive loads. Also, the company has been continuously in business since 1937 and when you eventually walk in with a service need or question you'll get an immediate knowledgeable answer. Because of their expertise they would also a good be a good place to consider having the Craftsman serviced but it might prove to be more costly than the machine is worth as box store machines are mostly designed to be tossed rather than serviced ...a sad statement on our wasteful society. If all it needs is a belt and new blades than the Craftsman is likely worth fixing and running into the ground, but if it needs more than that you might want to consider trading it in.

Excellent information for all.
Thank you.

Some folks have a knack about keeping old equipment going.
Others do not.

Sears never made anything. Sears would contract out to various suppliers for machinery that Sears sold. The supplier could change year to year and model to model. Sometimes real good. Sometimes junk.

At a certain age and certain condition - it might be better to bite the bullet and purchase new. No harm in getting it checked out at a qualified shop located as stated above.

trfour 04-22-2021 05:07 PM

Vidios
 
Quote:

Originally Posted by thinkxingu (Post 354158)
Yeah, I welded a hitch to the back plate so that I could tow more than just a garden trailer, but I know I'm probably at/beyond its expected use.

I'll check out the vids, thanks!

Sent from my SM-G950U using Winnipesaukee Forum mobile app

When you get to the Vids just scroll through them and they show you how to rebuild the mower deck.
I used to have an even older tractor at the Canp on Paugus Bay that i used for yard work, mowing, towing and such, ran good too! I got most of anything from Ryan Tractor in Tilton. they were great!

Wishing you well thinkxingu.

dpg 04-26-2021 08:53 AM

Don't know where your located or if your interested but there's also a John Deere dealership on Rte 16 not sure of the town. Follow Rte 25 to the end and turn right at the Yankee Smokehouse the dealer is maybe 6-10 miles on your left. They always seem to have a lot of product there for sale.

camp guy 04-26-2021 09:35 AM

Lawn/Garden Tractor Talk
 
The name of the John Deere dealer on Rt 16 (Ossipee) is United Ag & Turf, 1220 Rt 16, Ossipee, NH 03864, phone - 1-603-539-1303, fax - 1-603-539-3786.

They are real nice people, do quality work, and charge fair prices.

thinkxingu 04-26-2021 12:27 PM

That Broadmoor series looks pretty sweet, but there's so many complications.

Sent from my SM-G950U using Winnipesaukee Forum mobile app

Poor Richard 04-26-2021 05:09 PM

The wood splitter and small open trailer aren't taxing your machine at all, IMO. The belt drives can take quite a bit of weight and if they slip then you know you're at the limits.

I recently picked up a new riding mower however this is my first one with a hydrostatic trans. The convenience of the HST is nice for mowing and such however I found out immediately that the tow capacity is not great at all compared to the belt driven riders I've owned.

To put what I mean into perspective, I went from being able to move a 4x6 open trailer with ease to barely being able to move a garden trailer full of soil. The limitation is in the HST driven machine.

Formula260SS 04-26-2021 05:52 PM

Quote:

Originally Posted by Poor Richard (Post 354306)
The wood splitter and small open trailer aren't taxing your machine at all, IMO. The belt drives can take quite a bit of weight and if they slip then you know you're at the limits.

I recently picked up a new riding mower however this is my first one with a hydrostatic trans. The convenience of the HST is nice for mowing and such however I found out immediately that the tow capacity is not great at all compared to the belt driven riders I've owned.

To put what I mean into perspective, I went from being able to move a 4x6 open trailer with ease to barely being able to move a garden trailer full of soil. The limitation is in the HST driven machine.


Gear drive tractors will always put more power to the ground for sure, hydro tractors are nice that you can whip them around easy.

I have both - my old JD 214 which is a belt driven gear box will sit there and spin the wheels until it runs out of gas

My JD X748 4x4 Diesel Hydro has great power but will pop the pressure relief before the tires spin if the traction is good.

Small tractors are not designed to pull heavy loads. Be carful doing so, if the braking system is through the transmission (gear drive) and your towing on a grade and blow it up your freewheeling until you either crash or level off.

Most hydro tractors have a separate braking system (wet disc in some) but the hydro itself will brake the tractor also.

I hear the rule of thumb is to not tow more than the tractor weighs


All times are GMT -4. The time now is 01:13 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.