SnoPro trailer

[GTO]

I have a snopro trailer for my snowmobiles. One of the cables on the door has come unwound. Does anyone know where I can get this fixed? I tried with no luck

[SAB1]

Typically can find parts at etrailler.com but did you check with Joe at the trailer outlet in Tilton. Very nice guy and reasonable prices.

[GTO]

Typically can find parts at etrailler.com but did you check with Joe at the trailer outlet in Tilton. Very nice guy and reasonable prices.

Not sure I'd need parts. The cable didn't break, it just came unwound. Just don't know who to see about getting it fixed

[jeffk]

Joe at the trailer outlet in Tilton does REPAIRS to trailers. I won't speak for him as to WHAT he will repair but he will certainly have advice. Perhaps it unwound because something critical broke and it will need to be replaced? Joe can tell you what's what.

I had my SnoPro trailer gone over a few years ago after sitting inactive for several years. They cleaned and lubed the wheels and checked out the surge brakes. I expected, and Joe did as well, that I needed the brakes replaced but Joe said, surprisingly , that they did not need to be. I would have happily paid for new brakes but he honestly told me I didn't need them.

Bought my boat trailer from him. EXCELLENT PRICE! Very good to do business with.

[Blyblvrd]

I had the same thing happen to my SnoPro. Well it happened because I tried to drive my ski doo ski up the support wire. Lol. HK Powersports in Hookset fixed it. Think I paid $100?


Sent from my iPad using Winnipesaukee Forum mobile app (http://r.tapatalk.com/byo?rid=92687)

[raydoe1]

I also recommend the Trailer Outlet in Tilton.
Unexpectedly both axles on my 2004 Sno Pro trailer came off.
Had a ramp truck pick it up and deliver it to the Trailer Outlet.
They installed new axles and wheels within 2 weeks for a reasonable cost.

Very satisfied customer!

[ericnh]

I have a snopro trailer for my snowmobiles. One of the cables on the door has come unwound. Does anyone know where I can get this fixed? I tried with no luck

Have someone hold the door off the ground (to take pressure off and provide enough slack) so you can wind the cable around the top pully and connect again at the bottom.

[stynx55]

check you tube, Mine did the same thing and I was able to fix it in 10 minutes after watching the video,
https://www.youtube.com/watch?v=IP1h0P3-YAw

[robmac]

garage door person